Losmandy 24" Universal Dovetail D-Plate DUP24

This universal dovetail plate fits the 75mm dovetail slot of the "D-Plate" saddle used on many, if not all, of today's current mounts. Just verify your mount saddle with accept the Losmandy standard D plate spacing.  It is designed primarily to hold the mounting rings of longer focal length It is designed primarily to hold the mounting rings of longer focal length Astro Physics, Astro-Tech, Borg, Celestron, Explore Scientific, Meade, Orion, Parallax, Questar, Stellarvue, Takahashi, TeleVue, Vixen, and William Optics refractors, plus those of the larger Questar, Meade, and Celestron catadioptric optical tubes.

The dovetail has a series of 72 mounting holes on center-to-center separations of 35mm, 60mm, 1.25", 1.5" and 2", four centerline slots, and 14 centerline holes for installing virtually any configuration of mounting rings. The holes and slot are countersunk on the underside of the dovetail. This assures that the bolts holding the mounting rings will not protrude and keep the dovetail plate from sliding back and forth in the mount saddle for balancing. Thread-in bolts are provided to act as stops to keep the dovetail and optical tube from sliding out of the mount saddle should the mount's locking knob loosen accidentally. As a thoughtful touch, the corners of the 75mm dovetail are rounded to keep them from digging into the saddle and hanging up if the dovetail is not perfectly straight when it is installed on the mount.

The 0.7"thick dovetail is precision-machined of aluminum stock. It measures 24" long x4" wide overall and is anodized black for good looks and durability. It weighs 4.2lbs.