Astrophotography has a way of turning one telescope into a surprising collection of boxes and cables. There is the main camera, guide camera, focuser, filter wheel, power, USB cables, and somewhere in the middle of it all, a computer running the night.
The C404AN3 CEM40EC-NUC was built around a simple idea: put that computer on the mount and let the connections move with the telescope.
The front of the 6" dual saddle has a mounting plate for a slim Intel NUC or similar computer up to 38mm thick. Power for the computer, Ethernet, and USB can be routed through the mount instead of hanging across the RA and DEC axes. Add the CEM40EC's high-resolution RA encoder, internal iPolar, 1.75" LiteRoc tripod, 5 kg counterweight, and hard case, and you have a complete CEM40EC package designed around a clean, computer-controlled imaging system.
If you already know that a small computer is going to live at the telescope, this version saves you from figuring out where to put it later.
Put the Computer Where the Work Is
There are plenty of ways to run an imaging system. A laptop can sit beside the tripod. A mini computer can be strapped to a telescope. A control box can ride on a dovetail plate. They all work.
The NUC version simply builds that idea into the mount from the beginning.
iOptron puts the computer mounting plate at the front of the saddle, where a computer up to 38mm thick can travel with the telescope. Your imaging camera, guide camera, focuser, filter wheel, and other USB devices can then connect to a computer that is only a short cable away.
That becomes especially nice around the meridian. Instead of a bundle of cables running from equipment on the telescope down to a computer beside the tripod, much of the wiring moves with the payload.
The mount provides a USB 2.0 connection system and Ethernet pass-through, along with power connections for the equipment riding on the mount.
There is an important distinction with the NUC power connection. The mount does not convert its 12V supply into 19V for the computer. The NUC power connection is a pass-through. You connect the appropriate power supply for your NUC or computer at the mount's input panel, and that voltage is carried through to the saddle. For the Intel NUC models iOptron originally designed around, that is typically 19V.
The same idea applies to Ethernet: the mount gives you a clean path through the axes, but your network still has to be connected at the other end.
Why the EC Version Matters
Underneath the computer mounting system is the CEM40EC, and the EC is an important part of the name.
Every worm-driven equatorial mount has some amount of repeating error as the RA worm turns. On the standard CEM40, Permanent Periodic Error Correction and an autoguider can reduce that error.
The CEM40EC adds a high-resolution encoder to the RA axis. iOptron's Real-Time Periodic Error Correction uses the encoder to monitor the drive and correct the repeating RA error while the mount is tracking.
iOptron specifies encoder-corrected periodic error below 0.3 arcsecond RMS over the mount's 400-second worm period. That is a bench measurement of the RA drive, not a promise that your guiding graph will always show 0.3 arcsecond RMS. Seeing, wind, polar alignment, flexure, balance, and the telescope itself still have a vote.
What the encoder does is remove much of the repeating mechanical error from the RA drive before your guider has to deal with everything else.
And Yes, You May Still Guide
An encoder does not make the rest of astrophotography disappear.
It cannot correct polar-alignment drift, atmospheric refraction, movement caused by wind, or flexure somewhere in the imaging train. For demanding long-exposure work, particularly as focal length increases, an autoguider can still be useful.
The difference is that it is guiding a mount whose repeating RA worm error is already being corrected internally.
That is a much better reason to buy the EC than the promise of never guiding again.
A Complete CEM40EC Package
The NUC hardware is not the only difference between this package and a bare mount head. The C404AN3 comes with iOptron's 1.75" stainless-steel LiteRoc tripod, one 5 kg (11 lb) counterweight, internal iPolar, and a fitted hard case for the head.
The NUC version of the CEM40EC weighs about 18 pounds (8.2 kg) and carries up to 40 pounds (18 kg) of telescope and imaging equipment, excluding counterweights. That payload includes everything riding on the saddle, so the computer, mounting hardware, cameras, focuser, filter wheel, guider, and cables all count.
The 1.75" LiteRoc gives this version the heavier of the common CEM40 tripod choices, which makes sense. If you're building a computer-controlled imaging system with everything mounted together, a little more support underneath it is usually welcome.
The 6" saddle accepts both Losmandy D and Vixen-style dovetails, so the same mount can grow with the telescope.
iPolar Makes Moving It Easier
The CEM40EC-NUC is perfectly comfortable living in the backyard, but it is still light enough to travel. Every time an equatorial mount moves, however, it has to be polar aligned again.
iPolar is built into the RA axis. Instead of looking through an optical polar scope, its camera photographs the surrounding polar sky and plate-solves the field. The software then shows you how to adjust the mount in altitude and azimuth.
Polaris itself does not have to be visible, although enough of the surrounding polar sky must be clear for iPolar to identify the field.
Built-in GPS supplies the mount with time and location information, and automatic zero-position search gives it a repeatable mechanical starting point.
Clean Power and Cable Management
The NUC-ready version has more going on internally than the standard CEM40 cable pass-through.
At the saddle you have the computer power pass-through, Ethernet, and USB, along with auxiliary DC connections for equipment riding with the telescope. Three auxiliary DC outlets share up to 5A when powered through their separate cable-management input, while another 12V output from the mount supply is rated up to 3A.
That distinction matters when planning cameras, dew heaters, focusers, and other accessories. The connections are there to simplify the wiring, but power still has to come from somewhere, and the total current available should be matched to the equipment you intend to run.
In other words, the C404AN3 does not magically eliminate cables. It gives them a much better place to go.
Features
-
NUC-ready saddle. Mounts a slim Intel NUC or similar computer up to 38mm thick at the front of the saddle.
-
NUC power pass-through. Routes the computer's appropriate external power supply through the mount to the saddle.
-
Ethernet pass-through. Routes a wired network connection through the mount.
-
USB 2.0 cable management. Keeps computer and accessory USB connections close to the imaging train.
-
High-resolution RA encoder. Provides feedback for iOptron's Real-Time Periodic Error Correction.
-
Encoder-corrected PE below 0.3 arcsecond RMS. iOptron's bench specification over the 400-second worm period.
-
40 lb (18 kg) payload capacity. Rated payload excludes counterweights but includes the NUC and everything else riding on the saddle.
- 18 lb (8.2 kg) mount head.
- Internal iPolar electronic polar scope.
-
1.75" stainless-steel LiteRoc tripod. Approximately 7 kg (15.4 lb).
-
5 kg (11 lb) counterweight and stainless-steel counterweight shaft included.
-
Fitted hard case for the mount head included.
- 6" Losmandy D / Vixen dual saddle.
- GPS, automatic zero-position search, and power-down memory.
-
Optional Wi-Fi. iOptron's external iStarFi adapter can add direct wireless mount control.
- Two-year limited warranty.
What Owners Say on Cloudy Nights
The NUC versions never became the most common CEM40s, but owners who have used them tend to come back to the reason iOptron made them in the first place: keeping the electronics and wiring together.
"I found the cable management to be very useful."
That owner actually adapted the NUC mounting plate to carry an ASIAIR Pro rather than an Intel NUC. It is a useful example of what makes the design attractive: the real value is having a place for the control computer at the saddle and connections that do not have to cross the moving axes.
iOptron itself notes that computers other than the originally recommended Intel NUCs may fit, but mounting-hole patterns can vary. If you plan to use another mini PC or single-board computer, check its dimensions and mounting pattern before assuming it will bolt directly to the supplied plate.
Under the Night Sky
The advantage of an on-mount computer becomes most obvious after the novelty of the first few images wears off and astrophotography becomes an exercise in collecting time.
A bright target may give you a satisfying result in one evening. Faint reflection dust, weak narrowband structures, and small planetary nebulae can reward ten, twenty, or many more hours gathered over several nights.
The Squid Nebula inside the Flying Bat is a good example. It is not difficult because the telescope cannot point at it. It is difficult because the signal is faint, and faint signal asks for time.
A computer riding on the mount does not shorten that integration. What it can do is make the system cleaner and easier to automate: slew, plate-solve, guide, refocus, change filters, run a sequence, and collect data while you are inside rather than sitting beside the tripod watching every exposure finish.
That is where the NUC version earns its keep.
What's Included
- 1x iOptron CEM40EC-NUC Center-Balanced Equatorial mount head
- 1x High-resolution RA encoder with Real-Time Periodic Error Correction
- 1x Internal iPolar electronic polar scope
- 1x 6" Losmandy D / Vixen dual saddle with NUC mounting adapter
- 1x Go2Nova hand controller with built-in heater
- 1x iOptron 1.75" stainless-steel LiteRoc tripod
- 1x 5 kg (11 lb) counterweight
- 1x 28mm × 280mm stainless-steel counterweight shaft
- 1x Fitted hard case for the mount head
- 1x 100–240V AC adapter for the mount, for indoor use
- Mount connection accessories
Intel NUC or other control computer and its power supply are not included.
FAQ
- Is an Intel NUC included?
- No. The mount includes the NUC mounting plate and the connections for integrating a compatible computer, but the computer itself is not included.
- What size computer fits the mounting plate?
- iOptron designed the system around Intel NUC computers no more than 38mm thick. Other compact computers may also fit, but mounting-hole patterns can differ, so check the dimensions and mounting arrangement before buying.
- Does the mount supply 19V power to the NUC?
- It routes it, but it does not generate it. The NUC power connection is a pass-through. Connect the proper external power supply for your computer to the NUC power input on the mount, and that voltage is carried to the saddle. Do not connect a 19V NUC supply to one of the mount's 12V power inputs.
- What is the advantage of putting the computer on the saddle?
- Your cameras and accessories can use short connections to a computer that moves with the telescope. That reduces the number of long cables crossing the RA and DEC axes and makes a permanently assembled imaging train easier to manage.
- CEM40EC-NUC or regular CEM40EC?
- The NUC version makes sense if you already want a computer mounted with the imaging system and value the additional power, Ethernet, and USB cable management. If you normally run everything from a laptop beside the mount or already have another control-box arrangement you like, the standard CEM40EC may be all you need.
- Do I still need an autoguider?
- For demanding long-exposure imaging, particularly at longer focal lengths, guiding can still be useful. The RA encoder corrects the repeating drive error of the mount; it cannot correct every source of image movement in the complete telescope system.
- How much can the CEM40EC-NUC carry?
- iOptron rates it for up to 40 pounds (18 kg), excluding counterweights. The computer and its mounting hardware are part of the payload, along with the telescope, cameras, focuser, filter wheel, guider, and other equipment riding on the saddle.
- Does the mount have built-in Wi-Fi?
- No. Direct mount communication is through USB. The computer riding on the mount may have its own Wi-Fi, and iOptron's optional iStarFi adapter can add wireless control of the mount itself.
- Can I run the imaging system from inside the house?
- Yes, with the appropriate computer, network connection, and remote-control software. Many imagers use a mini PC at the telescope and remote into it from indoors. Fully unattended operation requires additional planning for weather, power, software recovery, and any observatory equipment.
Accessories
A compatible slim Intel NUC or mini computer (sold separately): provides the computer that rides on the saddle and runs the imaging software.
Electronic focuser (sold separately): allows imaging software to refocus automatically as temperature and conditions change.
Guide camera and guide scope or off-axis guider (sold separately): provides conventional autoguiding when your imaging system benefits from it.
iOptron 2.5 kg #8027-05 Counterweight (sold separately): adds balancing capacity when the complete payload requires more than the included 5 kg weight.
iOptron iStarFi Wi-Fi Adapter (sold separately): adds direct wireless communication with the mount.
Final Thoughts
The C404AN3 is for the imager who already knows a computer is going to become part of the telescope.
Instead of putting that computer on a table, hanging it from the tripod, or finding another bracket later, iOptron gave it a place at the saddle and routed power, Ethernet, and USB through the mount to meet it there.
Underneath that cable management is still the CEM40EC: a 40-pound-capacity center-balanced mount with a high-resolution RA encoder, Real-Time Periodic Error Correction, internal iPolar, a 1.75" LiteRoc tripod, counterweight, and hard case.
If your imaging system is going to spend long nights being controlled by a small computer anyway, putting the computer where the telescope is makes a lot of sense. That is the reason to choose the CEM40EC-NUC.