Skip to content
Save On Celestron NexStar SE and Evolution Telescopes
Save On Celestron NexStar SE and Evolution Telescopes

Over 5,000 Five Star Reviews

Free shipping over $100

Easy 30-day returns

Shop with an expert: 800-422-7876

iOptron 5" MiniPier for CEM26, HEM27, HAE29, and GEM28

SKU: 8040

Manufacturer Part # 8040

by iOptron
Original price $99.00 - Original price $99.00
Original price
$99.00
$99.00 - $99.00
Current price $99.00
Availability:
More on the way
Accepted Payment Methods
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

On a compact equatorial mount, the telescope can sometimes swing surprisingly close to the tripod. Point a long refractor high overhead, or move an imaging telescope across the meridian, and the back of the optical tube may approach the tripod legs. Add a focuser, filter wheel, camera, or star diagonal, and the available clearance can disappear quickly.

The iOptron 8040 MiniPier provides a straightforward solution. This 5.5" extension installs between a compatible tripod and the CEM26, GEM28, HEM27, or HAE29 mount head, raising the mount above the tripod and creating additional space for the telescope and its accessories.

It's a simple mechanical accessory, but one that can make a real difference when working with longer optical tubes or imaging equipment that extends well behind the focuser. Instead of buying a taller tripod or unnecessarily extending its legs, the MiniPier moves the mount head farther away from the tripod's upper structure.

More Clearance Where It Matters

The main purpose of the 8040 is to increase the distance between the telescope and the tripod legs.

With the MiniPier installed, the mount head sits approximately 5.5" higher relative to the tripod. That additional space can help prevent the back of a refractor, star diagonal, or imaging train from contacting a leg as the telescope moves across the sky.

The extra clearance is particularly useful during GoTo slews, meridian flips, and observing sessions involving objects high overhead.

It can also make visual observing more comfortable. A refractor's eyepiece can end up rather low when the telescope points toward the zenith. Raising the mount moves the eyepiece higher, potentially reducing the amount of bending or crouching required.

There's an important distinction, however. The MiniPier increases clearance; it does not guarantee that every possible telescope and accessory combination will avoid a collision.

Long optical tubes, unusually large imaging accessories, and particular mount positions can still present clearance problems. Always check the complete telescope's movement before allowing an unattended imaging session to begin.

Designed for iOptron's Smaller Mounts

The 8040 is specifically designed for four iOptron mount families:

  • iOptron CEM26, including EC configurations
  • iOptron GEM28, including EC configurations
  • iOptron HEM27
  • iOptron HAE29

Its 4" (100mm) diameter matches the mounting interface used with the compatible iOptron compact LiteRoc tripod.

The MiniPier is constructed from die-cast and machined metal, providing a relatively rigid extension without adding excessive weight to a portable setup.

At only 1 lb 9 oz, the extension is light enough to travel with the rest of your mount equipment.

The standard 8040 is intended for the mounting arrangement used by the four equatorial mount families listed above. iOptron also offers an optional configuration with a 3/8" threaded mounting bolt for equipment such as the SkyGuider Pro, SkyTracker Pro, SkyHunter, HAZ31, and HAZ46. That conversion should not be assumed to be included with the standard 8040.

For larger mounts such as the CEM40, GEM45, HAE43, and HEM44, iOptron offers a different MiniPier, part number 8031.

Does Raising the Mount Affect Stability?

Any time you raise equipment above its supporting tripod, you change the mechanical arrangement of the complete system.

The MiniPier adds height between the tripod and mount head. It also introduces an additional connection that must be properly secured.

One practical way to offset some of the extra height is to keep the tripod legs less extended. Shorter leg extensions can help reduce vibration and maintain a more compact overall setup.

For example, if your usual observing arrangement has the tripod legs extended several inches, you may be able to retract them after installing the MiniPier. The mount could then remain at approximately its previous height above the ground while gaining additional separation from the tripod's upper legs.

That isn't possible with every setup, and it doesn't guarantee identical stability. The results will depend on the tripod, telescope, and how the equipment is arranged.

The MiniPier also does not increase the mount's rated payload capacity or improve its inherent tracking accuracy. Its purpose is clearance and positioning, not additional load-carrying capacity.

Installing the MiniPier

iOptron provides assembly instructions for installing the 8040 between a compatible tripod and mount head.

The MiniPier consists of upper and lower mounting sections connected by three supports.

Installation on a compatible CEM26 or GEM28 tripod begins by removing the alignment peg from the tripod's original mounting surface. The lower MiniPier section is then secured to the tripod using two M6 screws.

Next, the upper section is attached using three connecting screws. The original alignment peg is installed in the MiniPier's upper mounting plate so the mount can be oriented and adjusted properly.

The alignment peg must be positioned correctly for the mount's azimuth adjustment arrangement. If its position is reversed, iOptron's instructions describe rotating the lower MiniPier section 180 degrees.

Once the extension is assembled and securely attached, the mount head can be installed in its normal orientation.

Follow the manufacturer's instructions for your particular tripod and mount configuration. All fastening hardware should be properly secured before installing the telescope and counterweights.

Need More Than 5.5 Inches?

iOptron also makes an 8" MiniPier for the same mount families, part number 8040-8.

The taller version uses the standard 5.5" MiniPier with additional spacer sections and longer mounting hardware to provide approximately 2.5" more height.

For many compact refractors and imaging systems, the standard 8040 may provide sufficient clearance. Longer optical tubes or particularly bulky imaging trains may benefit from considering the taller version.

Since additional height can affect the stability of the overall setup, choose the amount of extension your equipment actually needs rather than automatically selecting the tallest option.

Under the Night Sky

Some of the most rewarding astronomical objects pass high across the sky, and that's often where the available space between the telescope and tripod becomes especially important.

From mid-northern latitudes, the Andromeda Galaxy climbs high on autumn evenings. In spring, galaxies such as M51 in Canes Venatici and M101 in Ursa Major can also reach excellent observing positions near the meridian.

Those high positions are desirable because you're looking through less atmosphere than when an object is close to the horizon. But they can also place a long refractor's focuser, diagonal, or camera close to the tripod.

With the MiniPier installed, the telescope has additional room to move above the tripod's upper structure.

That's especially welcome during automated imaging sessions, when the mount may perform a meridian flip while the observer is concentrating on another part of the equipment or isn't standing beside the telescope.

The extra height doesn't eliminate the need for collision checks, but it can provide an important margin of clearance.

Observing Tip: Check Clearance Before Dark

If you're installing a MiniPier because your telescope has been getting close to the tripod, check the new arrangement in daylight before depending on it for an unattended imaging session.

Assemble the complete telescope with its normal accessories, including the camera, filter wheel, focuser, guide equipment, and cables.

With the telescope securely balanced and the mount properly configured, carefully test the positions it will encounter during the night. Pay particular attention to the zenith, the area around the meridian, and both sides of a planned meridian flip.

Use controlled movements and be ready to stop the mount before anything contacts the tripod. Don't deliberately allow the equipment to collide while testing.

Check cable clearance as carefully as mechanical clearance. A telescope may clear the tripod while a power or USB cable still catches on one of its legs.

Finally, verify your mount's software travel limits and meridian-flip settings. The MiniPier adds physical space, but proper mount configuration remains important.

Know Before You Buy

  • For specific compact iOptron mounts. Compatible with the CEM26, GEM28, HEM27, and HAE29 mount families using the appropriate tripod interface.
  • Adds approximately 5.5" of height. Provides additional clearance between the telescope and tripod.
  • Not a guarantee against collisions. Long optical tubes and imaging accessories must still be checked throughout the mount's travel.
  • Does not increase payload capacity. The mount's original rated capacity remains unchanged, and the practical stiffness of the complete setup should be evaluated.
  • Installation required. The MiniPier is secured to the tripod with mounting hardware, and the tripod's alignment peg must be transferred to the extension.
  • Other heights and interfaces exist. The 8040-8 adds more height. Larger iOptron mounts use different extensions.
  • Mount and tripod not included. This is the MiniPier extension assembly only.

What's Included

  • 1x iOptron 8040 MiniPier assembly, 5.5" high x 4" diameter
  • Manufacturer-supplied MiniPier assembly and mounting screws

Mount head, tripod, telescope, and optional 3/8" conversion adapter are not included. The tripod's existing alignment peg is reused during installation.

FAQ

Which mounts does the iOptron 8040 fit?
The standard 8040 is designed for the CEM26, GEM28, HEM27, and HAE29 mount families, including compatible EC versions of the CEM26 and GEM28.
How much height does it add?
Approximately 5.5" (140mm), according to iOptron's current product specifications.
Will the MiniPier prevent my telescope from hitting the tripod?
It provides additional clearance and can help prevent collisions involving the telescope, diagonal, or imaging accessories. However, clearance depends on the complete equipment configuration. Check all relevant telescope positions before unattended operation.
Will it make my mount less stable?
Raising the mount changes the system's mechanical geometry and may affect vibration or stability. Keeping tripod leg extensions relatively short can help, but the stability of the complete arrangement should be evaluated with your telescope installed.
Does the MiniPier increase the mount's payload capacity?
No. The MiniPier provides additional height and clearance. It does not increase the manufacturer's rated instrument capacity.
Can I use it with my CEM40 or GEM45?
Not in the standard configuration. Those mounts use a different mounting interface. iOptron offers the 8031 MiniPier for the CEM40, GEM45, and certain other larger mounts.
Is an 8" version available?
Yes. The iOptron 8040-8 is designed for the same compact mount families and provides approximately 8" of height using additional spacer sections.
Will it fit my SkyGuider Pro or SkyHunter?
iOptron offers an optional version of the MiniPier with a 3/8" threaded top connection for certain smaller tracking mounts and other compatible products. The standard 8040 does not include that conversion.
Does it work with the iOptron LiteRoc tripod?
Yes, with the compatible 4" mounting interface used by the CEM26, GEM28, HEM27, and HAE29. Other tripod interfaces may require different hardware or accessories.

Optional Accessories

iOptron 1.75" LiteRoc Tripod (#8283ACC, sold separately): A stainless steel tripod with a 4" mounting head, designed for the same compact mount families.

iOptron 8" MiniPier (#8040-8, sold separately): Provides additional height for setups that require more clearance than the standard 5.5" MiniPier.

Final Thoughts

A MiniPier isn't an accessory everyone needs. If your telescope already clears its tripod comfortably, adding height may accomplish very little.

But if you've watched a camera approach a tripod leg during a meridian flip, or found yourself crouching uncomfortably to look through a refractor pointed overhead, the reason for using one becomes obvious.

The iOptron 8040 raises the mount head approximately 5.5" above its normal tripod position, creating additional room for the telescope and its accessories. It's built for the CEM26, GEM28, HEM27, and HAE29 and adds only 1 lb 9 oz to the mounting system.

It won't change the mount's tracking accuracy or increase its carrying capacity, and the complete setup still needs to be checked for stability and clearance. But for the observer whose telescope is simply getting too close to the tripod, the 8040 provides an uncomplicated solution to a very real problem.

Tech Details:

Manufacturer iOptron
Product MiniPier Extension
Manufacturer Part Number 8040
Extension Height 5.5" (approximately 140mm)
Diameter 4" (100mm)
Weight 1 lb 9 oz (approximately 710g)
Construction Die-cast and machined metal
Compatible Mounts CEM26, GEM28, HEM27, HAE29
EC Model Compatibility CEM26EC and GEM28EC with compatible mounting interface
Tripod Interface Compatible compact iOptron 4" tripod mounting interface
Tripod Attachment Two M6 mounting screws
Pier Section Connection Three connecting screws
Alignment Peg Existing tripod alignment peg transferred to MiniPier
Optional 3/8" Conversion Available in alternate configuration; not part of standard 8040
Taller Version 8040-8, 8" extension, sold separately
Mount Included No
Tripod Included No
Manufacturer Shipping Weight Approximately 2.5 lb
Manufacturer Shipping Dimensions 9" x 6" x 6"

Product Manuals

8040_Installation.pdf

Overall rating: 5.0 / 5 from 1 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

The pier extension gives me

"The pier extension gives me some extra margin to prevent a camera-tripod collision. Works great!"

— Arthur K. (5/5)

Q&A

  • 5 stars: 2 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Arthur K.
The pier extension gives me

The pier extension gives me some extra margin to prevent a camera-tripod collision. Works great!

A
Arthur K.
The pier extension gives me

The pier extension gives me some extra margin to prevent a camera-tripod collision. Works great!