The CEM40EC is for the imager who wants tighter tracking without giving up the reason the CEM40 is so useful in the first place: a lot of mount without a lot of mount head.
It carries up to 40 lb (18 kg) of telescope and imaging equipment on a head weighing just 17.4 lb (7.9 kg). The EC version adds a high-resolution encoder on the right-ascension axis and iOptron's Real-Time Periodic Error Correction, continuously correcting the repeating error of the RA worm drive as the mount tracks.
iOptron specifies encoder-corrected periodic error below 0.3 arcsecond RMS, measured over the mount's 400-second worm period. Internal iPolar handles camera-based polar alignment, GPS supplies time and location, automatic zero-position sensing gives the mount a repeatable mechanical reference, and the 6-inch dual saddle accepts both Losmandy D and Vixen-style dovetails.
This C404A3 package also includes the support and balancing equipment needed to turn the head into a complete mount system: a 1.75-inch stainless-steel LiteRoc tripod, one 5 kg (11 lb) counterweight, counterweight shaft, Go2Nova hand controller, and hard carrying case. It is encoder-corrected tracking in a system designed to be carried outside and used regularly.
Key Features
-
40 lb payload capacity. iOptron rates the CEM40EC for up to 18 kg (40 lb) of telescope and imaging equipment, excluding counterweights.
-
17.4 lb mount head. At 7.9 kg, the CEM40EC provides substantial imaging capacity without requiring a heavy mount head.
-
High-resolution RA encoder. Encoder feedback monitors the right-ascension drive while the mount tracks.
-
Real-Time Periodic Error Correction. The EC version continuously corrects the repeating RA worm error rather than relying on a conventional trained PPEC curve.
-
Encoder-corrected PE below 0.3 arcsecond RMS. iOptron specifies this performance over the 400-second worm period under bench measurement.
-
Internal iPolar electronic polar scope. Camera-based polar alignment is built directly into the RA axis.
-
1.75-inch LiteRoc tripod included. Stainless-steel legs provide a portable support matched to the CEM40 family.
-
5 kg counterweight included. One 11 lb counterweight is supplied for the 28mm counterweight shaft.
-
Center-Balanced Equatorial design. iOptron's CEM layout places more of the combined mount and payload mass directly over the tripod.
-
Belt-driven worm system. Both axes use 110mm diameter, 216-tooth worm wheels driven by 17mm brass worms through synchronous belts.
-
45mm steel axles and 68mm bearings. Substantial internal components for a mount head weighing less than 18 pounds.
-
Precision stepper motors. 128 micro-steps provide a specified motor resolution of 0.08 arcsecond.
-
Up to 4.5°/sec slewing. Maximum GoTo speed is approximately 1080× sidereal.
-
Go2Nova hand controller. Provides an 8-line × 21-character display, built-in heater, and a database of more than 212,000 objects.
-
Built-in 32-channel GPS. Supplies time and location information to the mount.
-
Automatic zero-position search. The mount can electronically locate its mechanical reference position.
-
Power-down memory. Positional information can be retained after a normal power-down.
-
Configurable meridian treatment. The mount can stop or flip, with settings allowing up to 10° of travel past the meridian when clearance permits.
-
6-inch dual saddle. Accepts both Losmandy D and Vixen-style dovetail plates.
-
Through-mount connections. A 12V DC output rated to 3A, ST-4 guide connection, and USB are routed through the mount.
-
Optional Wi-Fi. iOptron's external iStarFi adapter can add wireless mount control.
-
Hard carrying case included. Protects the mount head during storage and transportation.
- Two-year limited warranty.
What the Encoder Adds
Every worm-driven equatorial mount has some amount of repeating error as the worm rotates. On a conventional mount, Permanent Periodic Error Correction and an autoguider are commonly used to reduce that repeating component.
The CEM40EC handles the RA drive differently.
A high-resolution encoder monitors the right-ascension axis while the mount is tracking. The control system uses that feedback for Real-Time Periodic Error Correction, continuously correcting the repeating RA worm error as it occurs.
iOptron specifies encoder-corrected periodic error below 0.3 arcsecond RMS, measured on the bench over one 400-second worm period.
That number describes the performance of the encoder-corrected RA drive itself. It is not a promise that every telescope will produce 0.3-arcsecond guiding or 0.3-arcsecond stars. Seeing, polar alignment, wind, telescope flexure, image scale, guiding, and the rest of the imaging system still matter.
What the encoder does is remove much of the predictable repeating RA worm error before the rest of the imaging system has to deal with it.
Guiding and the CEM40EC
The RA encoder does not make conventional autoguiding obsolete.
For demanding long-exposure astrophotography, particularly as focal length increases and the image scale becomes smaller, guiding can still respond to movement caused by the complete telescope system and observing conditions.
The difference is that the guider is starting with an RA drive whose repeating worm error is already being corrected internally by the encoder.
That is the better way to think about the EC version. You are not buying a promise that you will never guide again. You are buying a CEM40 whose RA tracking system is actively correcting its own periodic error in real time.
40 Pounds of Capacity on a 17.4-Pound Head
The payload-to-head-weight ratio is a big part of what makes the CEM40 family useful.
Forty pounds of payload capacity gives an imaging system room for more than the optical tube. Cameras, filter wheels, electronic focusers, rotators, guide equipment, dew-control hardware, rings, dovetails, and cabling all become part of the load the mount actually carries.
At the same time, the mount head itself remains under 18 pounds. That matters when the system has to be carried into the yard, packed for a dark-sky trip, or taken down after an ordinary weeknight session.
Payload weight is still only one part of choosing a mount. A compact telescope and a long telescope of the same weight do not place the same demands on the axes. Tube length, diameter, center of gravity, wind exposure, focal length, and image scale should all be considered along with the number on the scale.
iPolar Built Into the RA Axis
The CEM40EC includes iOptron's iPolar electronic polar scope inside the RA axis.
Instead of looking through a traditional optical polar scope and positioning a star on a reticle, iPolar photographs the surrounding polar sky and plate-solves the field. The software determines where the mount's RA axis is pointing relative to the celestial pole and shows you how to adjust the altitude and azimuth controls.
Polaris itself does not have to be visible. Enough surrounding polar sky still needs to be available for the camera to solve successfully, but you do not have to identify the pole star and manually position it on a reticle.
For a mount designed to be transported and set up repeatedly, having the polar-alignment camera permanently installed is particularly useful.
A Complete Portable Package
This version of the CEM40EC includes the basic pieces needed to build a working equatorial mount rather than leaving you to choose them separately.
The included LiteRoc tripod uses 1.75-inch stainless-steel legs and is matched to the CEM40 platform. It provides the portable foundation that makes sense for a mount head weighing only 17.4 pounds.
One 5 kg (11 lb) counterweight is included along with the mount's 28mm × 280mm stainless-steel counterweight shaft. The amount of counterweight ultimately required depends on the complete telescope and imaging train, so some heavier or differently balanced systems may require an additional weight.
The mount head travels in its own hard case, allowing the tripod, counterweight, and head to remain separate pieces when the system is moved.
Connections for an Imaging System
The CEM40EC includes a straightforward through-mount cable-management system.
A 12V DC output rated to 3A, an ST-4 guide connection, and USB are routed through the mount so those cables do not have to cross the moving axes externally.
The USB connection is a pass-through rather than a multi-port imaging hub. A more complicated imaging train may still use a small hub or mini computer near the telescope.
The mount itself communicates with a computer through USB. Built-in Wi-Fi is not included, but iOptron's optional iStarFi adapter can add wireless mount communication.
What Owners Say on Cloudy Nights
The CEM40EC has been discussed extensively by owners on Cloudy Nights, and the comments that come up repeatedly help explain why the mount has remained attractive even as newer mount designs have appeared.
"Very light weight and easy to handle."
That comment from a CEM40EC owner gets to one of the mount's biggest real-world advantages. The published payload number matters, but so does whether you actually want to carry the mount outside. Owners regularly come back to the relatively low head weight and portability of the CEM40 platform.
"Compact, effective and cost-effective."
Another owner used those words after living with a CEM40EC and working through how the encoder and guiding interact.
Owner discussions also make an important distinction about the EC system. Experienced imagers generally do not treat the RA encoder as a reason to abandon guiding in every situation. Instead, they value it for reducing the periodic component of RA tracking error inside a compact mount. For mobile imagers in particular, some CEM40EC owners have called the encoder version especially useful because it adds that tracking correction without moving to a larger mount.
iPolar receives similar praise in owner discussions. CEM40EC owners have repeatedly described it as easy to use and particularly convenient on a mount that is regularly set up and taken down.
Under the Night Sky
The CEM40EC makes the most sense when you want meaningful imaging capacity and tighter RA tracking without building the entire system around a much heavier mount.
At shorter and moderate focal lengths, its 40 lb payload gives a complete imaging train room to grow instead of forcing every accessory to compete for the final few pounds of capacity.
As focal length increases and image scale becomes more demanding, the high-resolution RA encoder becomes increasingly relevant because the mount is correcting the repeating component of its own worm-drive error internally.
That gives the CEM40EC a broad working range: light enough to be moved regularly, substantial enough for a serious imaging system, and precise enough to make sense when the telescope begins asking more of the mount.
What's Included
- 1x iOptron CEM40EC Center-Balanced Equatorial mount head
- High-resolution RA encoder with Real-Time Periodic Error Correction
- 1x Internal iPolar electronic polar scope
- 1x 6-inch Losmandy D / Vixen dual saddle
- 1x Go2Nova hand controller with built-in heater
- 1x iOptron 1.75-inch LiteRoc stainless-steel tripod
- 1x 5 kg (11 lb) counterweight
- 1x 28mm × 280mm stainless-steel counterweight shaft
- 1x Hard carrying case for the mount head
- 1x 100–240V AC adapter for indoor use
- Mount connection accessories
Frequently Asked Questions
How much can the CEM40EC carry?
iOptron rates it for up to 40 lb (18 kg) of telescope and imaging equipment, excluding counterweights. Telescope geometry, center of gravity, focal length, wind exposure, and imaging requirements should be considered along with total weight.
How much does the mount head weigh?
The CEM40EC head weighs 17.4 lb (7.9 kg).
What is the difference between the CEM40 and CEM40EC?
They share the same basic 40 lb CEM40 platform. The standard CEM40 uses conventional worm tracking with Permanent Periodic Error Correction. The CEM40EC adds a high-resolution RA encoder and Real-Time Periodic Error Correction, with iOptron specifying encoder-corrected PE below 0.3 arcsecond RMS.
Where is the encoder?
The high-resolution tracking encoder is on the right-ascension axis.
What is the periodic-error specification?
iOptron specifies encoder-corrected periodic error below 0.3 arcsecond RMS, measured on the bench over the mount's 400-second RA worm period.
Does the CEM40EC use PEC?
It uses iOptron's Real-Time Periodic Error Correction, or RPEC, in conjunction with the high-resolution RA encoder rather than relying on a conventional trained PPEC curve.
Do I still need to guide the CEM40EC?
Guiding can still be useful for demanding long-exposure astrophotography, particularly at longer focal lengths and smaller image scales. The encoder corrects the repeating error of the RA drive; a guider can still respond to movement elsewhere in the complete telescope system.
Can the CEM40EC be used unguided?
Encoder correction can make unguided operation more practical in some combinations of focal length, exposure time, image scale, and polar alignment, but it does not correct every source of image motion. It should not be viewed as a guarantee of unguided long-exposure imaging.
Does the RA encoder correct polar-alignment error?
No. The encoder corrects the behavior of the RA tracking drive. It does not physically correct a misaligned polar axis, atmospheric refraction, seeing, wind, or flexure elsewhere in the telescope system.
Does the CEM40EC include iPolar?
Yes. iOptron's internal iPolar electronic polar scope is installed in the RA axis.
Does iPolar require Polaris to be visible?
No. Polaris itself does not have to be visible. Enough surrounding polar sky still needs to be available for the camera to plate-solve successfully.
Does this package include a tripod?
Yes. This C404A3 package includes iOptron's 1.75-inch stainless-steel LiteRoc tripod.
Does it include a counterweight?
Yes. One 5 kg (11 lb) counterweight is included. Some heavier or differently balanced telescope systems may require additional counterweight.
Does the CEM40EC have built-in Wi-Fi?
No. The mount communicates over USB. iOptron's optional iStarFi adapter can add wireless mount control.
Does it have a built-in USB hub?
No. USB is routed through the mount as part of its cable-management system, along with a 12V/3A output and ST-4 connection, but there is no multi-port USB imaging hub.
What power does the CEM40EC require?
The mount uses 12V DC at up to 5A with a 5.5mm/2.5mm connector. iOptron lists typical consumption at approximately 0.6A while tracking and 0.9A during GoTo. A 100–240V AC adapter intended for indoor use is included.
Accessories
iOptron 2.5 kg #8027-05 Counterweight (sold separately): useful when the complete telescope system requires more counterweight than the included 5 kg weight provides.
iOptron Tri-Pier #8034 (sold separately): a more substantial support option when portability is less important.
iOptron iStarFi Wi-Fi Adapter (sold separately): adds wireless mount communication.
Final Thoughts
The CEM40EC works because the encoder is added to a mount that was already built around a useful balance of capacity and portability.
Its 40 lb payload gives a complete imaging train room to grow, while the 17.4 lb head remains easy enough to move on an ordinary clear night. The high-resolution RA encoder and Real-Time Periodic Error Correction address the repeating worm error inside the mount itself, while internal iPolar, GPS, automatic zero search, through-mount connections, and the dual saddle handle the rest of the imaging platform.
This package adds the 1.75-inch LiteRoc tripod, 5 kg counterweight, and hard case, so the basic mount system arrives together instead of being assembled piece by piece.
Cloudy Nights owners tend to come back to the same qualities: it is compact, easy to handle, and capable of carrying a serious imaging system. The EC version adds tighter control of the RA drive without giving up those qualities.
If you want encoder-corrected tracking in a mount that is still easy to carry outside and use regularly, that is the reason to choose the CEM40EC.