Skip to content
Save On Celestron NexStar SE and Evolution Telescopes
Save On Celestron NexStar SE and Evolution Telescopes

Over 5,000 Five Star Reviews

Free shipping over $100

Easy 30-day returns

Shop with an expert: 800-422-7876

iOptron CEM40EC Center Balanced GoTo Equatorial Mount With 1.5" Tripod

Original price $4,289.00 - Original price $4,289.00
Original price
$4,289.00
$4,289.00 - $4,289.00
Current price $4,289.00
Availability:
More on the way
Product Description

For the imager who wants CEM40EC tracking without hauling more tripod than necessary. The C404A1 carries 40 pounds on a 17.4-pound head, adds a high-resolution RA encoder with Real-Time Periodic Error Correction, and includes internal iPolar, a 1.5" stainless tripod, 5 kg counterweight, and hard case. It is the lighter CEM40EC package for people who actually move their mount from place to place.

Accepted Payment Methods
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Category: Tripods & Monopods
SKU: CEM40EC

There are a couple of ways to buy a CEM40EC, and the difference between them is not really the mount. The head is the same 40-pound-capacity CEM40EC either way, with the same high-resolution RA encoder, the same internal iPolar, and the same 17.4-pound mount head. What changes is the tripod underneath it.

This C404A1 package comes with iOptron's 1.5" stainless steel tripod, which weighs about 11 pounds (5 kg). The C404A3 package uses the larger 1.75" LiteRoc, which weighs about 15.4 pounds (7 kg). Four pounds does not sound like much when you're reading a specification table. It feels a little more important when you're carrying the mount, tripod, counterweight, telescope, camera case, battery, and laptop from the car to an observing field.

That is the reason this version exists. You still get the full CEM40EC mount, a 5 kg counterweight, internal iPolar, and a fitted hard case for the head. You simply get it on the lighter tripod.

If the mount is going to travel, move around the yard, or regularly come out of the garage for a clear night, that can be a very sensible trade.

The Lighter Tripod Does Not Mean a Smaller Mount

It is tempting to look at the 1.5" tripod and think this must be the version for camera lenses and tiny refractors. That sells the package short.

iOptron still rates the CEM40EC for up to 40 pounds (18 kg) of telescope and imaging equipment, excluding the counterweight. The head itself has not changed. It still weighs 17.4 pounds (7.9 kg), uses the same 110mm worm wheels, the same belt drive, the same 6" Losmandy D/Vixen dual saddle, and the same encoder-corrected RA drive.

What does change is the amount of support underneath it.

A short, compact imaging system is easier on a tripod than a long refractor of the same weight. Wind matters. So does the height of the tripod, the center of gravity of the telescope, and how much equipment is hanging behind the focuser. That is why there is no single payload number that tells the whole story.

If you're building a long or particularly heavy imaging system, or the mount is going to live at home where four pounds of tripod weight does not matter very much, I would lean toward the 1.75" LiteRoc or a Tri-Pier. If you're actually going to carry the system somewhere, the lighter 1.5" tripod starts making a lot more sense.

What the Encoder Actually Does

Every worm-driven equatorial mount has some periodic error. The worm turns once every few minutes, and very small imperfections in the drive repeat with each rotation.

The standard CEM40 deals with that in the traditional way: Permanent Periodic Error Correction can reduce the repeating error, and an autoguider can correct what remains.

The CEM40EC does something different. A high-resolution encoder watches the right-ascension axis while the mount is tracking. iOptron's Real-Time Periodic Error Correction uses that feedback to correct the repeating RA drive error as it happens.

iOptron specifies encoder-corrected periodic error below 0.3 arcsecond RMS, measured over the mount's 400-second worm period. That is a bench measurement of the corrected RA drive, not a promise that your guiding graph will read 0.3 arcsecond or that every exposure will suddenly be perfect.

Seeing still exists. So do wind, flexure, balance, polar-alignment error, and everything else happening between the ground and the camera sensor.

What the encoder gives you is a mount that is already correcting one of its own major repeating errors before your guider ever has to respond to it. That is the useful part.

Do You Still Guide It?

Usually, yes, particularly as focal length gets longer and image scale becomes more demanding.

I would not buy the CEM40EC because someone told you an encoder means you'll never guide again. The encoder is correcting the RA drive. A guider can still see movement caused by polar alignment, flexure, wind, atmospheric seeing, and the rest of the telescope system.

The difference is that the guider is working with a cleaner RA drive to begin with.

At shorter focal lengths, some combinations of polar alignment, exposure time, and image scale can make unguided imaging practical. That is a useful possibility, but it is better treated as something your particular system may allow rather than as a reason to buy the mount.

Setting Up at a New Site

A portable equatorial mount has one unavoidable job every time it changes locations: you have to point the RA axis at the celestial pole again.

The CEM40EC has iOptron's iPolar camera built into the RA axis. Instead of looking through a traditional polar scope and trying to place a star on a reticle, iPolar photographs the surrounding polar sky, plate-solves the field, and shows you on the computer which way to adjust the mount.

Polaris itself does not have to be visible. The camera still needs enough of the surrounding polar region to recognize the star field, but you are not dependent on seeing the pole star itself.

That is especially handy with this version of the CEM40EC because this is the package most likely to change locations. Built-in GPS supplies the new time and location, while the automatic zero-position search gives the mount a known mechanical starting point.

The 6" saddle accepts both Losmandy D and Vixen-style dovetails, so you are not committed to one rail system as the telescope changes.

A Few Cables You Don't Have to Chase Around the Mount

Cable management is one of those features that looks fairly unimportant on a product page and becomes more important after you've spent a few nights imaging.

The CEM40EC routes a 12V output rated to 3A, an ST-4 guide connection, and USB through the mount. That gives you a way to bring some of the connections up to the moving side of the system instead of letting every cable drape across the axes.

It is not a built-in multi-port USB hub, so a larger imaging train may still use a small hub or mini computer near the telescope. The mount itself communicates through USB, and Wi-Fi can be added with iOptron's optional iStarFi adapter.

Features

  • 40 lb (18 kg) payload capacity on a 17.4 lb (7.9 kg) mount head.
  • High-resolution RA encoder with Real-Time Periodic Error Correction.
  • Encoder-corrected periodic error below 0.3 arcsecond RMS over the 400-second worm period under iOptron's bench measurement.
  • Internal iPolar electronic polar scope for camera-based polar alignment.
  • 1.5" stainless steel tripod weighing approximately 11 lb (5 kg).
  • 5 kg (11 lb) counterweight and stainless steel counterweight shaft included.
  • Fitted hard case for the mount head included.
  • 6" Losmandy D/Vixen dual saddle.
  • GPS, automatic zero-position search, and power-down memory.
  • USB, ST-4, and 12V cable management routed through the mount.
  • Go2Nova hand controller with built-in heater and 212,000+ object database.
  • Two-year limited warranty.

What Owners Say on Cloudy Nights

The 1.5" tripod has generated plenty of discussion over the years, which is not surprising. People see a 40-pound mount riding on relatively light legs and wonder whether the tripod is enough.

"I'm using it as a portable mount to carry around, so 1.5" tripod is definitely a proper start."

That came from a CEM40EC owner using roughly 20 pounds of equipment. Other owners have used the same tripod with complete 4" refractor imaging systems and been satisfied with the result.

There are also owners who eventually move to a heavier tripod, MiniPier, or Tri-Pier as the telescope gets longer or the imaging system gets heavier. That does not make the 1.5" tripod a mistake. It simply reflects the same thing we see with every mount: the support becomes more important as the telescope asks more of it.

For us, the useful community takeaway is that the 1.5" tripod is a legitimate portable foundation for the CEM40EC. It is not restricted to camera lenses. The heavier supports simply give you more margin when portability becomes less important.

Under the Night Sky

This package naturally appeals to people carrying smaller refractors and compact imaging systems to darker skies, but there is no reason to think of it as a wide-field-only mount.

With a short refractor, the targets can be enormous: the North America and Pelican Nebulae together, the California Nebula, the broad clouds around Sadr, the dusty fields of Taurus, or Rho Ophiuchi spreading around Antares.

Move up in focal length and the mount does not suddenly become a different CEM40EC. Galaxies, planetary nebulae, globular clusters, and smaller emission regions are still on the menu. You simply begin paying more attention to the length of the telescope, wind, tripod height, and the rigidity of the complete setup.

That is one of the nicer things about buying more mount than your first telescope needs. The telescope can change without forcing you to start over underneath it.

What's Included

  • 1x iOptron CEM40EC Center-Balanced Equatorial mount head
  • 1x High-resolution RA encoder with Real-Time Periodic Error Correction
  • 1x Internal iPolar electronic polar scope
  • 1x 6" Losmandy D / Vixen dual saddle
  • 1x Go2Nova hand controller with built-in heater
  • 1x iOptron 1.5" stainless steel tripod, approximately 5 kg (11 lb)
  • 1x 5 kg (11 lb) counterweight
  • 1x 28mm × 280mm stainless steel counterweight shaft
  • 1x Fitted hard carrying case for the mount head
  • 1x 100–240V AC adapter for indoor use
  • Mount connection accessories

FAQ

Why choose the C404A1 instead of the C404A3?
The mount head is the same CEM40EC. The difference is the tripod. The C404A1 uses iOptron's 1.5" stainless tripod, which weighs about 11 pounds. The C404A3 uses the larger 1.75" LiteRoc at about 15.4 pounds. Choose this version when easier transport matters more; choose the LiteRoc when you would rather put more tripod underneath the mount.
Is the 1.5" tripod only for small refractors?
No. It is the standard lighter tripod iOptron supplies with this CEM40EC package, and owners use it with complete refractor imaging systems. Long tubes, heavier payloads, wind, and very demanding image scales can make a heavier tripod or pier worthwhile.
How much can the CEM40EC carry?
iOptron rates the mount for up to 40 pounds (18 kg) of telescope and imaging equipment, excluding counterweights. As always, OTA size and length matter in addition to weight.

Accessories

iOptron 1.75" LiteRoc Tripod (sold separately): the next step when you want a more substantial portable support under the same CEM40EC head.

iOptron MiniPier for CEM40 (sold separately): useful when a longer refractor or camera train needs additional clearance from the tripod legs.

iOptron 2.5 kg #8027-05 Counterweight (sold separately): adds balancing capacity when the included 5 kg counterweight is not enough for the complete telescope system.

iOptron Tripod Carry Bag (sold separately): gives the 1.5" stainless tripod its own bag for travel and storage.

iOptron iStarFi Wi-Fi Adapter (sold separately): adds wireless mount communication.

Final Thoughts

The C404A1 is not a stripped-down CEM40EC, and it is not a special version meant only for camera lenses. It is the same encoder-equipped CEM40EC placed on the lighter of iOptron's two common tripod choices.

You still get the 40-pound payload rating, 17.4-pound head, high-resolution RA encoder, Real-Time Periodic Error Correction, internal iPolar, GPS, dual saddle, through-mount connections, counterweight, and hard case.

The thing you save is weight underneath it.

If your mount lives ten feet from its observing spot, the heavier LiteRoc may be the easy choice. If you're the person who has to carry the whole system across the yard, through a campground, or from the car to a dark-sky field, four pounds starts to feel like a specification worth paying attention to.

That is the reason to choose this CEM40EC package.

Tech Details:

Mount Type Center-balanced equatorial mount (CEM)
Payload 40 lb (18 kg), excluding counterweight
Mount Weight 17.4 lb (7.9 kg)
Payload / Mount Weight 2.28
Structure All metal, CNC machined; anodized red/black
Latitude Adjustment 0°–60° (special counterweight-shaft mounting below 10°)
Azimuth Adjustment ±6°
Periodic Error < 0.3 arcsec RMS (with encoder, measured on the bench, 400-second period)
PEC Real-time PEC (RPEC), via high-resolution RA encoder
Worm Φ17mm, brass
RA / DEC Worm Wheels Φ110mm, 216 teeth
RA / DEC Axis Shafts Φ45mm, steel
RA / DEC Bearings Φ68mm
Counterweight Shaft Φ28 × 280mm, stainless steel (1.2 kg)
Counterweight 5 kg (11 lb), included
Motor Precision stepper motor, 1.8°, 128× micro-step
Motor Resolution 0.08 arcsec
Transmission Synchronous belt
Maximum Slew Speed 4.5°/sec (1080×)
Hand Controller Go2Nova, 8-line, 21-character LCD, built-in heater; 212,000+ object database
Power Requirement 12V DC, 5A (5.5/2.5mm plug); AC adapter included, indoor use only
Power Consumption 0.6A tracking, 0.9A GoTo
Power-Down Memory Yes
Polar Scope Internal iPolar electronic polar scope (included)
Meridian Treatment Stop (0–10° past meridian), flip
Zero Position Automatic zero search
Dovetail Saddle 6″ Losmandy D and Vixen
GPS Yes
Guide Port ST-4
Communication USB; Wi-Fi via optional external iStarFi adapter
Cable Management DC 12V (3A), ST-4, USB
Operating Temperature −10 °C to 40 °C
Tripod iOptron 1.5″ stainless steel tripod, approx. 5 kg (included)
Hard Case Included
Shipping Weight / Box Mount: 33 lb, 21 × 16 × 9 in; tripod with counterweight: 29 lb, 34 × 9 × 9 in
Warranty Two year limited
Product Code C404A1