Skip to content
Save On Celestron NexStar SE and Evolution Telescopes
Save On Celestron NexStar SE and Evolution Telescopes

Over 5,000 Five Star Reviews

Free shipping over $100

Easy 30-day returns

Shop with an expert: 800-422-7876

iOptron CEM40 Center Balanced GoTo Equatorial Mount With iPolar 1.75" Literoc Tripod And Case

Original price $2,889.00 - Original price $2,889.00
Original price
$2,889.00
$2,889.00 - $2,889.00
Current price $2,889.00
Availability:
In Stock
Product Description
The C402A3 package takes the guesswork out of putting together a CEM40 system. Instead of buying the mount head and then working out which tripod and counterweight you need, this version arrives with the CEM40, a matched 1.75-inch LiteRoc tripod,...
Accepted Payment Methods
  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa
Category: Telescope Accessories
SKU: CEM402HC

The C402A3 package takes the guesswork out of putting together a CEM40 system. Instead of buying the mount head and then working out which tripod and counterweight you need, this version arrives with the CEM40, a matched 1.75-inch LiteRoc tripod, one 5 kg (11 lb) counterweight, internal iPolar, and a hard case for the mount head.

Underneath the package is the same reason the CEM40 has become such a useful imaging mount: it carries up to 40 lb (18 kg) of telescope and imaging equipment on a head weighing just 17.4 lb (7.9 kg). That gives you meaningful room for cameras, filter wheels, focusers, guide equipment, and future telescope changes without turning the mount itself into something you hesitate to carry outside.

Internal iPolar provides camera-based polar alignment, Permanent Periodic Error Correction helps reduce the repeating component of RA tracking error, GPS supplies time and location, and automatic zero-position sensing gives the mount a repeatable mechanical reference. A 6-inch dual saddle accepts both Losmandy D and Vixen-style dovetails.

If you want the CEM40 as a complete portable system rather than as a head you still have to build around, this is the package to choose.

Key Features

  • Complete CEM40 package. Includes the mount head, 1.75-inch LiteRoc tripod, 5 kg counterweight, internal iPolar, counterweight shaft, hand controller, and hard case.
  • 40 lb payload capacity. iOptron rates the CEM40 for up to 18 kg (40 lb) of telescope and imaging equipment, excluding counterweights.
  • 17.4 lb mount head. At 7.9 kg, the CEM40 provides considerably more payload capacity than its own weight might suggest.
  • Center-Balanced Equatorial design. iOptron's CEM layout places more of the combined mount and payload mass directly over the tripod.
  • Internal iPolar electronic polar scope. Camera-based polar alignment is built into the RA axis.
  • Periodic error below ±7.5 arcseconds. iOptron specifies native PE below ±7.5 arcseconds over the mount's 400-second worm period.
  • Permanent Periodic Error Correction. A trained PEC curve can be stored in the mount to reduce the repeating component of RA tracking error.
  • Belt-driven worm system. Both axes use 110mm diameter, 216-tooth worm wheels driven by 17mm brass worms through synchronous belts.
  • 45mm steel axles and 68mm bearings. Substantial internal components for a mount head weighing less than 18 pounds.
  • Precision stepper motors. 128 micro-steps provide a specified motor resolution of 0.08 arcsecond.
  • Up to 4.5°/sec slewing. Maximum GoTo speed is approximately 1080× sidereal.
  • Go2Nova hand controller. Provides an 8-line × 21-character display, built-in heater, and a database of more than 212,000 objects.
  • Built-in 32-channel GPS. Supplies time and location information to the mount.
  • Automatic zero-position search. The mount can electronically locate its mechanical reference position.
  • Power-down memory. Positional information can be retained after a normal power-down.
  • Configurable meridian treatment. The mount can stop or flip, with settings allowing up to 10° of travel past the meridian when clearance permits.
  • 6-inch dual saddle. Accepts both Losmandy D and Vixen-style dovetail plates.
  • Through-mount connections. A 12V DC output rated to 3A, ST-4 guide connection, and USB are routed through the mount.
  • Optional Wi-Fi. iOptron's external iStarFi adapter can add wireless mount control.
  • Hard carrying case included. Protects the mount head during storage and transportation.
  • Two-year limited warranty.

A Complete CEM40 System

Buying a mount head by itself makes sense when you already own the support and counterweights you want. If you are starting from scratch, however, the tripod and counterweight are not optional details.

This package takes care of those choices for you.

The included LiteRoc uses 1.75-inch stainless-steel legs and is matched to the CEM40 platform. One 5 kg (11 lb) counterweight is supplied for the mount's 28mm × 280mm stainless-steel shaft, and the CEM40 head travels in its own fitted hard case.

The amount of counterweight required ultimately depends on the complete telescope and imaging train. Some heavier or differently balanced systems may require additional counterweight, but adding counterweight does not increase the mount's 40 lb payload rating.

The advantage of the package is simply that the basic mount, support, and balancing system have already been matched for you.

40 Pounds of Capacity Without a Heavy Head

The CEM40 occupies a useful middle ground between small portable equatorial mounts and larger systems such as the CEM70.

Forty pounds of payload capacity gives you room for more than the telescope itself. Cameras, filter wheels, electronic focusers, guide equipment, rotators, dew-control hardware, rings, dovetails, and cables all become part of the load the mount actually carries.

At the same time, the mount head remains under 18 pounds. That matters when the system gets carried into the backyard after work, packed into a vehicle for a dark-sky trip, or taken down at the end of the night.

Payload weight is still only part of choosing a mount. A compact telescope and a long telescope at the same weight do not place the same demands on the axes. Tube length, diameter, center of gravity, wind exposure, focal length, and image scale should all be considered along with total weight.

Tracking and Guiding

The standard CEM40 is a precision worm-driven equatorial mount rather than an encoder-corrected model.

Both RA and DEC use 110mm diameter, 216-tooth worm wheels driven by 17mm brass worms through synchronous belts. The RA worm completes one cycle every 400 seconds, and iOptron specifies native periodic error below ±7.5 arcseconds.

Permanent Periodic Error Correction allows the mount to store a correction for the repeating component of that RA worm error.

For demanding long-exposure astrophotography, particularly as focal length and image scale increase, conventional autoguiding remains the normal approach. PPEC can reduce the predictable repeating component while the guider responds to the behavior of the complete telescope and imaging system.

If you specifically want a high-resolution RA encoder correcting periodic error inside the mount, the CEM40EC package is the corresponding step up.

iPolar Built Into the RA Axis

The CEM40 includes iOptron's iPolar electronic polar scope inside the RA axis.

Instead of looking through an optical polar scope and positioning a star on a reticle, iPolar photographs the surrounding polar sky and plate-solves the field. The software determines where the RA axis is pointing relative to the celestial pole and shows you how to adjust the mount's altitude and azimuth controls.

Polaris itself does not have to be visible. Enough of the surrounding polar sky still needs to be available for the camera to solve successfully, but you do not have to identify the pole star and manually place it on a reticle.

That is especially useful on a mount intended to be transported and set up repeatedly.

Connections for an Imaging System

The CEM40 includes a straightforward through-mount cable-management system.

A 12V DC output rated to 3A, an ST-4 guide connection, and USB are routed through the mount so those connections do not have to cross the moving axes externally.

This is not a multi-port USB imaging hub. A more complicated imaging train may still use a small USB hub or mini computer mounted near the telescope.

The mount communicates with a computer through USB. Built-in Wi-Fi is not included, but iOptron's optional iStarFi adapter can add wireless mount communication.

What Owners Say on Cloudy Nights

Cloudy Nights discussions about the CEM40 tend to come back to the same qualities that make the specification sheet interesting in the first place: a relatively light mount head, useful payload capacity, internal cable routing, and an electronic polar-alignment system that works well for a mount that is regularly set up and taken down.

"Well built ... solid performer ... relatively lightweight and portable."

That description from a CEM40 owner captures the appeal of the mount better than a single guiding number. Other owners in the same discussions have specifically praised the through-mount USB and 12V connections and described iPolar as convenient and easy to use.

Owners also report using the CEM40 with complete imaging trains rather than just lightweight telescope tubes, which is where the 40 lb payload and low head weight begin to make sense together.

Guiding results vary with seeing, telescope, focal length, balance, guide equipment, and setup, so we would not use one owner's RMS number as a specification. The more useful community takeaway is that the CEM40 has earned a reputation as a capable imaging mount that remains relatively easy to move and set up.

Under the Night Sky

The CEM40 works well for the kind of imaging system that needs more than a small portable mount but does not yet require CEM70-class capacity.

With a lighter imaging train, the 40 lb payload leaves room for cameras, filter wheels, focusers, guide equipment, and future additions instead of forcing every accessory to compete for the last few pounds of capacity.

As the telescope becomes longer, heavier, or more sensitive to wind, mechanical demands rise even when the system remains below the published payload limit. That is where tube geometry and focal length become just as important as total weight.

The useful part is that the CEM40 gives you room to grow while the 17.4 lb head remains something you can reasonably carry outside on an ordinary clear night.

What's Included

  • 1x iOptron CEM40 Center-Balanced Equatorial mount head
  • 1x Internal iPolar electronic polar scope
  • 1x 6-inch Losmandy D / Vixen dual saddle
  • 1x Go2Nova hand controller with built-in heater
  • 1x iOptron 1.75-inch LiteRoc stainless-steel tripod
  • 1x 5 kg (11 lb) counterweight
  • 1x 28mm × 280mm stainless-steel counterweight shaft
  • 1x Hard carrying case for the mount head
  • 1x 100–240V AC adapter for indoor use
  • Mount connection accessories

Frequently Asked Questions

How much can the CEM40 carry?
iOptron rates the CEM40 for up to 40 lb (18 kg) of telescope and imaging equipment, excluding counterweights. Telescope geometry, center of gravity, focal length, wind exposure, and imaging requirements should be considered along with total weight.

How much does the mount head weigh?
The CEM40 head weighs 17.4 lb (7.9 kg).

What is included in this package?
This C402A3 package includes the CEM40 mount head with internal iPolar, 1.75-inch LiteRoc tripod, one 5 kg counterweight, counterweight shaft, Go2Nova hand controller, hard case, and AC adapter.

How is this different from the CEM40 head-only version?
The mount itself is the same basic CEM40. The head-only package leaves the tripod and counterweight to you. This package includes the matched LiteRoc tripod and one 5 kg counterweight.

What is the periodic error?
iOptron specifies native periodic error below ±7.5 arcseconds, measured over the mount's 400-second worm period.

Does the CEM40 have PEC?
Yes. The standard CEM40 supports Permanent Periodic Error Correction.

Does the CEM40 need guiding?
For demanding long-exposure astrophotography, particularly at longer focal lengths, guiding is the normal approach. The standard CEM40 does not have the high-resolution RA encoder used by the CEM40EC.

CEM40 or CEM40EC?
Both share the same basic 40 lb mechanical platform and are available as complete packages. The standard CEM40 uses conventional worm tracking with PPEC. The CEM40EC adds a high-resolution RA encoder with Real-Time Periodic Error Correction. If you already expect to guide and do not need encoder correction, the standard CEM40 gives you the same basic payload class for less.

Does the CEM40 include iPolar?
Yes. This package includes iOptron's internal iPolar electronic polar scope.

Does iPolar require Polaris to be visible?
No. Polaris itself does not have to be visible, although enough surrounding polar sky must be available for the camera to plate-solve successfully.

Is one 5 kg counterweight enough?
That depends on the weight and center of gravity of the complete telescope system. One 5 kg weight is included, and additional compatible counterweights can be added when required for proper balance.

Does the CEM40 have built-in Wi-Fi?
No. The mount communicates over USB. iOptron's optional iStarFi adapter can add wireless mount control.

Does it have a built-in USB hub?
No. USB is routed through the mount as part of its cable-management system, along with a 12V/3A output and ST-4 connection, but there is no multi-port imaging hub.

Can I use a pier later?
Yes. The LiteRoc can remain your portable support while an appropriate Tri-Pier or permanent pier is used for a fixed setup.

What power does the CEM40 require?
The mount uses 12V DC at up to 5A with a 5.5mm/2.5mm connector. iOptron lists typical consumption at approximately 0.6A while tracking and 0.9A during GoTo. A 100–240V AC adapter intended for indoor use is included.

Accessories

iOptron 2.5 kg #8027-05 Counterweight (sold separately): useful when the complete telescope system requires more counterweight than the included 5 kg weight provides.

iOptron Tri-Pier #8034 (sold separately): a more substantial support option when portability is less important.

iOptron iStarFi Wi-Fi Adapter (sold separately): adds wireless mount communication.

Final Thoughts

The point of the C402A3 package is not simply that more pieces come in the box. It is that the pieces you need to turn a CEM40 into a working portable mount system are already there and matched to one another.

The CEM40 provides 40 lb of payload capacity on a 17.4 lb head, along with internal iPolar, PPEC, GPS, automatic zero search, through-mount connections, and a dual saddle. The package adds the 1.75-inch LiteRoc tripod, 5 kg counterweight, and hard case.

Cloudy Nights owners tend to praise the same combination the specifications suggest: useful capacity, relatively low weight, easy transport, and convenient features such as iPolar and through-mount cabling.

If you want a complete CEM40 system rather than a mount head that still needs a tripod and counterweight, this is the straightforward way to buy it.

Tech Details:

Mount Type Center-balanced equatorial mount (CEM)
Payload 40 lb (18 kg), excluding counterweight
Mount Weight 17.4 lb (7.9 kg)
Payload / Mount Weight 2.28
Structure All metal, CNC machined; anodized red/black
Latitude Adjustment 0°–60° (special counterweight-shaft mounting below 10°)
Azimuth Adjustment ±6°
Periodic Error < ±7.5 arcsec (measured with encoder, 400-second period)
PEC Permanent PEC (PPEC)
Worm Φ17mm, brass
RA / DEC Worm Wheels Φ110mm, 216 teeth
RA / DEC Axis Shafts Φ45mm, steel
RA / DEC Bearings Φ68mm
Counterweight Shaft Φ28 × 280mm, stainless steel (1.2 kg)
Counterweight 5 kg (11 lb), #8027, included
Motor Precision stepper motor, 1.8°, 128× micro-step
Motor Resolution 0.08 arcsec
Transmission Synchronous belt
Maximum Slew Speed 4.5°/sec (1080×)
Hand Controller Go2Nova, 8-line, 21-character LCD, built-in heater; 212,000+ object database
Power Requirement 12V DC, 5A (5.5/2.5mm plug); AC adapter included, indoor use only
Power Consumption 0.6A tracking, 0.9A GoTo
Power-Down Memory Yes
Polar Scope Internal iPolar electronic polar scope (included)
Meridian Treatment Stop (0–10° past meridian), flip
Zero Position Automatic zero search
Dovetail Saddle 6″ Losmandy D and Vixen
GPS Yes
Guide Port ST-4
Communication USB; Wi-Fi via optional external iStarFi adapter
Cable Management DC 12V (3A), ST-4, USB
Operating Temperature −10 °C to 40 °C
Tripod iOptron 1.75″ LiteRoc, stainless steel legs (included)
Hard Case Included
Shipping Weight / Box Mount: 33 lb, 21 × 16 × 9 in; tripod: 22 lb, 34 × 9 × 9 in; counterweight: 12 lb, 10 × 10 × 4 in
Warranty Two year limited
Product Code C402A3