{"title":"Finderscope Brackets","description":"","products":[{"product_id":"mounting-bracket-for-6-x-30mm-takahashi-finderscope","title":"Takahashi Mounting Bracket for 6 x 30mm Takahashi Finderscope","description":"\u003cp\u003eThis heavy-duty finderscope bracket is designed to fit the rear cell of Takahashi 78mm and larger refractor optical tubes only. It is painted Takahashi green to match the finish of the scopes' rear cells and has a flat mounting shoe with holes spaced to fit the Takahashi rear cells only. The mounting ring is sized specifically to hold a Takahashi 6 x 30mm finderscope. Three chromed ball-head bolts in the front of the mounting ring center the finderscope body in the ring. Three hand-tighten non-marring nylon-tipped bolts in the rear of the ring collimate the finder with the main scope optics. Separate locking nuts on the collimating bolts hold the collimation firmly in place until you change it.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003cbr\u003e\n\u003c\/h2\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e6 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Takahashi","offers":[{"title":"Default Title","offer_id":40221635477577,"sku":"TAK30H","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/products\/3820_1.jpg?v=1662966752"},{"product_id":"finderscope-adapter-block-to-put-losmandy-quick-release-bracket-on-televue-scopes","title":"TeleVue Finderscope Adapter Block to Put Losmandy Quick Release Bracket on TeleVue Scopes","description":"\u003cp\u003eWhile all Tele Vue finders are of the non-magnifying red dot type, some observers prefer to use a magnifying finder on their TeleVue refractor to help find faint objects that are too dim to be seen with the unaided eye through a red dot finder.\u003c\/p\u003e\n\u003cp\u003eThis plastic finderscope adapter block allows you to install an optional Losmandy 50mm quick release bracket, \u003ca href=\"\/losmandy-65mm-quick-release-finderscope-bracket_p4337.aspx\"\u003e#LQRB\u003c\/a\u003e, and an optional 50mm finderscope on any TeleVue refractor. The plastic adapter block slips into one of the dovetail grooves cut into each TeleVue tube mounting ring and is securely held in place by hex-head bolts. The Losmandy ring\/dovetail combination clamps onto the dovetail built into the top of the adapter block.\u003c\/p\u003e\n\u003cp\u003eOne finger-tighten knob locks the finderscope mounting ring dovetail into the adapter block. This allows the finder to be quickly removed so the telescope can be put in its carrying case. The long adapter dovetail surfaces assure that the finder will be accurately collimated when it is reinstalled as the scope is being set up again.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003c\/h2\u003e\n\u003ctable class=\"table\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e1 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"TeleVue","offers":[{"title":"Default Title","offer_id":40221641637961,"sku":"TVFAB","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/files\/FAB_1008_FindrAdaptBlockcopy.jpg?v=1723739658"},{"product_id":"50mm-quick-release-bracket-for-scts","title":"Antares 50mm Quick Release Bracket for SCTs","description":"\u003cp\u003eThis inexpensive finderscope quick-release bracket is designed to mount 50mm Antares right-angle finders primarily on Celestron and Meade Schmidt-Cassegrains 8\" in aperture, but will also hold virtually any 50mm finder on almost any scope 6\" in aperture and larger. The internal diameter of the rings is 62mm. The collimating screws will hold tubes as small as 46mm in diameter, but 50mm is a more practical lower limit to allow some screw travel for collimation purposes.\u003c\/p\u003e\n\u003cp\u003eThe quick release base has two oval slots that line up with the finder bracket mounting holes on the rear cell of an SCT. The mounting slots will let you mount the bracket on rear cell holes with a center to center spacing range of approximately 1.2\" to 1.45\". The bracket attaches semi-permanently using the bolts supplied with the original telescope finder bracket (new bolts are not supplied with the quick release). The quick release base can also be attached to a reflector's Sonotube or metal optical tube by using nuts and bolts (not supplied), although it may require drilling a new hole in the optical tube if the existing tube hole spacing does not match the mounting hole spacing in the quick release base. The curvature of the quick release base will fit virtually any telescope from 6\" in aperture and larger.\u003c\/p\u003e\n\u003cp\u003eThe quick release ring portion has two finder mounting rings, each with three hand-tighten plastic collimating screws. The ring portion slides into a dovetail slot in the base and is held in place by one plastic hand-tighten knob. A stop in the base fits into a groove in the ring portion to lock the ring portion in place and prevent the finder from sliding out of the bracket. Die-cast metal, painted black, with plastic collimating screws.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003c\/h2\u003e\n\u003ctable class=\"table\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e6 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Antares","offers":[{"title":"Default Title","offer_id":40221642031177,"sku":"50QRB","price":34.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/products\/4386_1.jpg?v=1662966961"},{"product_id":"accessory-bracket-to-mount-a-televue-tv-60-on-an-sct-as-a-superfinder","title":"TeleVue Accessory Bracket to Mount a TeleVue TV-60 on an SCT as a Superfinder","description":"\u003cp\u003eThis Tele Vue dovetail accessory bracket lets you mount a TeleVue TV-60 apochromatic refractor on a Schmidt-Cassegrain telescope for \u003cem\u003ecasual \u003c\/em\u003euse as a superfinder. Using this adapter does not permit collimation of the TV-60 with the main scope optics. If the TV-60 is to be used as your primary finderscope on a catadioptric, consider instead the \u003ca href=\"\/televue-x-y-mount-tv-60-schmidt-cassegrains_p8532.aspx\"\u003eTeleVue #TVXYC mount\u003c\/a\u003e. The #TVXYC permits \u003cem\u003every \u003c\/em\u003eprecise collimation of the TV-60 with the main scope, even at high magnifications.\u003c\/p\u003e\n\u003cp\u003eThe black-finish machined metal dovetail bracket has two slots that line up with the accessory mounting holes at the 1 o'clock position on the rear cell of a catadioptric telescope (Schmidt-Cassegrain, Maksutov-Cassegrain, \"Advanced Ritchey-Chrétien,\" etc.) It attaches semi-permanently using the cosmetic bolts supplied with the telescope to seal the holes in the scope's rear cell (new bolts are not supplied with this accessory bracket).\u003c\/p\u003e\n\u003cp\u003eThe mounting bar on the TV-60 slides into the dovetail slot of the bracket and is held in place by a single large plastic hand-tighten knob.\u003c\/p\u003e\n\u003cp\u003eThere is a safety stop in the dovetail slot that will keep the TV-60 from sliding out of the bracket should the locking knob accidentally loosen during use.\u003c\/p\u003e\n\u003cp\u003eThis adapter can also be used in conjunction with the optional TeleVue \u003ca href=\"\/televue-accessory-bar-starbeam-red-dot-finder-catadioptric-tvsctb_p5264.aspx\"\u003e#TVSSB accessory bar\u003c\/a\u003e to adapt a TeleVue-version Starbeam red dot finder to a catadioptric telescope so that one Starbeam can be used with two different telescopes.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003c\/h2\u003e\n\u003ctable class=\"table\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"TeleVue","offers":[{"title":"Default Title","offer_id":40221645111369,"sku":"TVSCTB","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/products\/5263_1.jpg?v=1662967058"},{"product_id":"7-5-x-50mm-blue-right-angle-finder","title":"Antares 7.5 X 50mm Blue Right Angle Finder","description":"\u003cp\u003eThis right-angle erect image finderscope is a sensible replacement for the straight-through inverted image 8 x 50mm finder supplied as standard equipment with many Meade catadioptric telescopes, such as all past and present LX200 models. It also is available as an upgrade for the 6 x 30mm finder supplied with many other Meade catadioptric telescopes, such as the LX10, LX50, an older 2080, etc.\u003c\/p\u003e\n\u003cp\u003eThe right-angle first-surface mirror diagonal gives images that are upright, but mirror-image reversed, just as they are in the eyepiece of a refractor or catadioptric telescope. This makes the finder particularly useful with Meade refractor and Schmidt-Cassegrain scopes, as the finder's image orientation matches the upright mirror-image orientation you see in the scope's eyepiece.\u003c\/p\u003e\n\u003cp\u003eIts large 50mm fully-multicoated achromatic doublet objective lens has a limiting magnitude of 11, fainter than the stars on any commercial star chart, making it easy for you to locate faint nebulas and galaxies. The field of view is a generous 7 degrees wide and the eye relief is a very good 15mm. There's a rolldown rubber eyecup for eyeglass use. The finder weighs 17.6 ounces, without optional finder bracket. It will fit into the standard 8 x 50mm finder dovetail supplied with most Meade scopes that come with a straight-through 8 x 50mm finder. If you're upgrading from a smaller finder, reflector-type dual mounting rings and an SCT-type quick release dovetail bracket are available as options. The 54.5mm diameter body of the finder is aluminum, painted in Meade blue and internally baffled for higher contrast. The black anodized aluminum lens cell has an extra long integral shade to retard the formation of dew and shield the objective from ambient light. The lens shade has internal anti-reflection grooving for higher contrast.\u003c\/p\u003e\n\u003cp\u003eThe supplied crosshair eyepiece is removable and has a standard 1.25\" barrel. It is held in place by a thumbscrew to allow easy orientation of the crosshairs to match the optical axis of the scope. You first rough-focus the finder by loosening the thumbscrew in the diagonal's eyepiece holder and sliding the eyepiece in and out of the diagonal until it is focused on infinity. The thumbscrew is then tightened to hold that focus. A diopter ring on the eyepiece allows you to fine-tune the focus for individual observers without having to loosen the thumbscrew or move the eyepiece.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003c\/h2\u003e\n\u003ctable class=\"table\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e18 oz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Antares","offers":[{"title":"Default Title","offer_id":40221648257097,"sku":"750BU","price":84.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/products\/7014_1.jpg?v=1662967171"},{"product_id":"quick-release-finder-bracket-to-mount-finders-up-to-50mm-on-televue-scopes","title":"TeleVue Quick-Release Finder Bracket to Mount Finders up to 50mm on TeleVue Scopes","description":"\u003cp\u003eThe black-finish machined metal dovetail base of this Tele Vue quick-release finderscope bracket slides into one of the dovetail grooves machined into the top of the ring mount supplied with (or available for) all TeleVue refractors. A supplied bold threads into a countersunk hole on the dovetail and into the ring mount to hold the dovetail firmly in place.\u003c\/p\u003e\n\u003cp\u003eThe black-finish machined metal quick release ring portion of the bracket has two finder mounting rings, each with three good-sized hand-tighten plastic collimating screws. The rings will hold virtually any commercially-available 50mm finderscope. The ring portion slides into the dovetail slot in the bracket's base and is held in place by one hand-tighten metal-shaft knob. The head of the knob is ribbed plastic for a firm and secure grip. The dovetail base will also hold Astro-Tech, Vixen, and Orion stalk-type finders.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003c\/h2\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"TeleVue","offers":[{"title":"Default Title","offer_id":40221649436745,"sku":"TVQRB","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/files\/QFM_1008_FinderMnt.jpg?v=1723746889"},{"product_id":"x-y-mount-to-attach-tv-60-to-schmidt-cassegrains","title":"TeleVue X-Y Mount to Attach TV-60 to Schmidt-Cassegrains","description":"\u003cp\u003eThis X-Y axis adjustable mount system lets you use the TeleVue TV-60 refractor as a superfinder on a Celestron or Meade Schmidt-Cassegrain telescope 8\" or larger in aperture. It allows you to collimate the optical axis of the TV-60 precisely with the optical axis of the larger scope so that the two scopes are aimed at the same point in the sky.\u003c\/p\u003e\n\u003cp\u003ePlease refer to the close-up image above to identify the parts of the mount (click on the small image to display a close-up, if you have not already done so). The mount component labeled \"Dovetail\" has a long arm that fits into the X-Y axis adjuster (the block with the knobs attached at the left of the image). The end of the arm can be seen protruding from the lower left end of the X-Y adjuster. The X-Y adjuster bolts into the \"Mounting Block,\" using the two labeled bolts seen protruding from the underside of the adjuster.\u003c\/p\u003e\n\u003cp\u003eThe part labeled \"SCT Accessory Bracket\" should be permanently installed in either of the two pairs of holes provided for finderscope mounting at the 10 o'clock and 2 o'clock positions on the rear cell of your SCT using the screws supplied with the SCT. The 50mm factory finderscope is usually mounted in the 10 o'clock set of holes and can either be replaced by the TV-60 or used as a straight-through supplement to the larger aperture TV-60 superfinder. The mounting block with the X-Y adjuster attached is then inserted into the SCT accessory bracket. The plastic knob in the SCT accessory bracket locks the mounting block (carrying the X-Y adjustable mount) in place. There is a safety stop-screw in the accessory bracket and a safety counterbore in the mounting block for security. Position the SCT accessory bracket on your SCT so that safety stop-screw is at the eyepiece end of your SCT telescope.\u003c\/p\u003e\n\u003cp\u003eRemoving the \"stop screws\" on the end of the TV-60 dovetail (and the \"stop screw\" on the X-Y mount's dovetail) lets you install the TV-60 on the X-Y mount's dovetail. Remember to reinstall the dovetail's stop screw for safety after the TV-60 is installed on the dovetail.\u003c\/p\u003e\n\u003cp\u003eThe large knob in the X-Y adjuster, labeled \"Lock Knob,\" acts as a pivot for the 2 horizontal adjustment screws that move the dovetail with its attached TV-60 from side to side (only the adjustment screw nearest the camera is shown). The lock knob simultaneously acts as the lock knob for the vertical \"jack screw\" adjustment that moves the dovetail and TV-60 up and down.\u003c\/p\u003e\n\u003cp\u003eBy adjusting the lock knob and various screws while looking alternately through your scope and the TV-60, you can precisely aim the optical axis of the TV-60 at the same point in the sky at which your main scope is aimed. Removing the dovetail's stop screw quickly lets you remove the TV-60 for use on a photo tripod for terrestrial observing or casual astronomy when you don't have time to take your main scope outside. If the adjustment screws are not disturbed while your TV-60 is off the main scope, the TV-60 should be correctly collimated when it is again mounted on the X-Y mount's dovetail. If it is not, a few quick tweaks of the collimating screws will soon have it lined up properly again.\u003c\/p\u003e\n\u003cp\u003eThe X-Y adjuster\/dovetail assembly portion of this system can be used on its own to mount the TV-60 on the ring mount of all TeleVue refractors, allowing this adapter to serve a double purpose. Alternatively, this mount is available at lower cost without the mounting block and SCT accessory bracket as part #TVXYA to use strictly on TeleVue scopes without this mount's dual purpose capability.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003c\/h2\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"TeleVue","offers":[{"title":"Default Title","offer_id":40221649698889,"sku":"TVXYC","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/files\/AAC_0002_XY_for_SCTcopy.jpg?v=1723753971"},{"product_id":"astro-tech-vixen-style-mounting-bracket-for-astro-tech-multiple-reticle-finder","title":"Astro-Tech Vixen-Style Mounting Bracket for Astro-Tech Multiple Reticle Finder","description":"\u003cp\u003eThis Astro-Tech mounting stalk lets you use the Astro-Tech multiple reticle finder with many Vixen\/Celestron\/Orion-style refractors or reflectors . . .The Astro-Tech #ATFBV is a single-piece mounting stalk for the Astro-Tech #ATF multiple reticle finder that will let you mount the finder directly into a Vixen\/Celestron\/Orion-style finder mounting shoe.\u003c\/p\u003e\n\u003cp\u003eThe bottom of the mounting stalk has a V-shaped base that is 30mm wide at its widest point. This will let it fit into the finder mounting bracket provided with most of the refractor and reflector telescopes from the above manufacturers. It lets you replace the inexpensive plastic single red dot finders and small refractor-type finders with the more flexible illuminated multiple reticle patterns of the Astro-Tech #ATF finder.\u003c\/p\u003e\n\u003cp\u003eThe top of the mounting stalk has narrow V-shaped ridges that the #ATF finder body clamps onto in order to lock the finder in place.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003c\/h2\u003e\n\u003ctable id=\"product-attribute-specs-table\" class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e2 oz.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Astro-Tech","offers":[{"title":"Default Title","offer_id":40221663789129,"sku":"ATFBV","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/products\/15887.jpg?v=1662967714"},{"product_id":"telrad-2-riser-base-for-telrad-finder","title":"Telrad 2.5\" Riser Base for Telrad Finder","description":"\u003ch3 data-start=\"139\" data-end=\"171\" class=\"\"\u003e\u003cstrong data-start=\"143\" data-end=\"169\"\u003eTelrad 2.5\" Riser Base\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"172\" data-end=\"228\" class=\"\"\u003e\u003cstrong data-start=\"172\" data-end=\"228\"\u003eA Comfortable Middle Ground for Easier Finder Access\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"230\" data-end=\"556\" class=\"\"\u003eThe Telrad 2.5\" Riser Base gives you a simple way to raise your Telrad reflex sight to a more comfortable height on your telescope. Designed for those who find the stock Telrad placement a bit too low—especially on large Dobsonians or Newtonians—this riser improves eye-level access without the extra height of the 4\" version.\u003c\/p\u003e\n\u003cp data-start=\"558\" data-end=\"906\" class=\"\"\u003eThis 2.5\" riser inserts between your existing Telrad and its mounting base. It raises the Telrad finder just enough to clear focuser knobs, tube curves, or other accessories, making it easier to get behind the finder without twisting or hunching. It’s a perfect match for observers who want better ergonomics but don’t need a full 4 inches of lift.\u003c\/p\u003e\n\u003cp data-start=\"908\" data-end=\"1196\" class=\"\"\u003eMade of rugged black plastic to match the Telrad’s housing, the riser uses the same dovetail-style slide-in system as the standard base. Installation is quick and tool-free—just slide it in and go. Your Telrad locks in just as securely as before, only at a more convenient viewing height.\u003c\/p\u003e\n\u003cp data-start=\"1198\" data-end=\"1448\" class=\"\"\u003eThe 2.5\" riser is also stackable with other Telrad risers if you want to experiment with different heights. Whether you’re observing at a star party or solo in your backyard, the 2.5\" riser offers a better line of sight without adding bulk or weight.\u003c\/p\u003e\n\u003cp data-start=\"1450\" data-end=\"1558\" class=\"\"\u003e\u003cstrong data-start=\"1450\" data-end=\"1468\"\u003eCompatibility:\u003c\/strong\u003e Works with any standard Telrad base and finder. Telrad and mounting base sold separately.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003c\/h2\u003e\n\u003ctable class=\"table\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e4 oz.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Telrad","offers":[{"title":"Default Title","offer_id":40221670604873,"sku":"3997","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/files\/IMG_6330.jpg?v=1758139180"},{"product_id":"telrad-4-riser-base-for-telrad-finder","title":"Telrad 4\" Riser Base for Telrad Finder","description":"\u003ch3 class=\"\" data-end=\"173\" data-start=\"143\"\u003e\u003cstrong data-end=\"171\" data-start=\"147\"\u003eTelrad 4\" Riser Base\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"\" data-end=\"234\" data-start=\"174\"\u003e\u003cstrong data-end=\"234\" data-start=\"174\"\u003eElevate Your Telrad for Easier, More Comfortable Viewing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"561\" data-start=\"236\"\u003eThe Telrad 4\" Riser Base is a simple but incredibly helpful upgrade for users of the popular Telrad reflex finder. Designed to raise your Telrad four inches above your telescope’s optical tube, this riser improves ergonomics and viewing comfort—especially on larger scopes where the finder often ends up in awkward positions.\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"946\" data-start=\"563\"\u003eThis riser base installs between your existing Telrad finder and its mounting base. It adds four inches of vertical clearance, making it easier to get your eye behind the finder without craning your neck or contorting your body. If you use a Dobsonian or any other scope where the finder ends up low on the tube or in tight spaces, this spacer can make a big difference in usability.\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"1242\" data-start=\"948\"\u003eThe 4\" riser is made of sturdy black plastic to match the Telrad's original design. It slides into your existing Telrad base using the same dovetail-style mount, so no tools are required for installation. Once attached, your Telrad locks in securely, just as it would directly on the telescope.\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"1499\" data-start=\"1244\"\u003eThe Telrad 4\" riser base is also stackable with the 2\" riser or other risers for those needing even more height. Whether you’re star hopping near the zenith or just want a more comfortable observing position, this riser is a simple and effective solution.\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"1596\" data-start=\"1501\"\u003e\u003cstrong data-end=\"1519\" data-start=\"1501\"\u003eCompatibility:\u003c\/strong\u003e Fits any standard Telrad base. Telrad finder and mounting base not included.\u003c\/p\u003e\n\u003ch2\u003eTech Details: \u003c\/h2\u003e\n\u003ctable class=\"table\" id=\"product-attribute-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e5 oz.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd class=\"data\"\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Telrad","offers":[{"title":"Default Title","offer_id":40221670637641,"sku":"3998","price":22.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/files\/IMG_6329.jpg?v=1758139140"},{"product_id":"astro-tech-finderscope-mounting-shoe","title":"Astro-Tech Finderscope Mounting Shoe","description":"\u003cp\u003eThis finderscope mounting shoe is designed to work on a variety of Astro-Tech telescopes, as well as other manufacturers.\u003c\/p\u003e\n\u003cp\u003eThis finder shoe is designed to work on a variety of Astro-Tech telescopes.  It will not work on all of them however. The opening of the shoe will accept generic Vixen style finder brackets.\u003c\/p\u003e\n\u003cp\u003eDo not use the screws provided with the shoe.  We have found them to be too long and they have caused damage to the finish of the finderscope drawtube.  We have been using the screws that are supplied wtih the telescope with great success.\u003c\/p\u003e\n\u003cp\u003eWe know it will work on:\u003c\/p\u003e\n\u003cp\u003eAT60EDP\u003c\/p\u003e\n\u003cp\u003eAT72EDII\u003c\/p\u003e\n\u003cp\u003eAT60ED\u003c\/p\u003e\n\u003cp\u003eAT70ED\u003c\/p\u003e\n\u003cp\u003eAT80ED\u003c\/p\u003e\n\u003cp\u003eAT102ED\u003c\/p\u003e\n\u003cp\u003eAT80EDL\u003c\/p\u003e\n\u003cp\u003eAT102EDL\u003c\/p\u003e\n\u003cp\u003eAT125EDL\u003c\/p\u003e\n\u003cp\u003eAT150EDL\u003c\/p\u003e\n\u003cp\u003eAT90CFT\u003c\/p\u003e\n\u003cp\u003eAT90EDX\u003c\/p\u003e\n\u003cp\u003eAT130EDX\u003c\/p\u003e\n\u003cp\u003eAT92\u003c\/p\u003e\n\u003cp\u003eAT80EDT\u003c\/p\u003e\n\u003cp\u003eAT115EDT\u003c\/p\u003e\n\u003cp\u003eAT130EDT\u003c\/p\u003e\n\u003cp\u003eAT152EDT\u003c\/p\u003e\n\u003cp\u003eAT86EDQ\u003c\/p\u003e\n\u003cp\u003eAT106EDQ\u003c\/p\u003e\n\u003cp\u003eAT126EDQ\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Astro-Tech","offers":[{"title":"Default Title","offer_id":40481985167433,"sku":"ATSHOE","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/products\/img_1917.jpg?v=1675379663"},{"product_id":"tele-vue-quick-release-finder-scope-shoe","title":"Tele Vue Quick Release Finder Scope Shoe","description":"\u003cp\u003eIf you wanting to attach a Vixen style finder bracket to your Tele Vue mounting ring, this is what you are looking for.  The finder shoe will attach to all Tele Vue ring mounts and allow easy installation of vixen style finder brackets and accessories.\u003c\/p\u003e\n\u003c!----\u003e","brand":"TeleVue","offers":[{"title":"Default Title","offer_id":41600094502985,"sku":"QRB-1002","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/files\/qrb_1002_qr_bracket.jpg?v=1720719967"},{"product_id":"tele-vue-dovetail-for-qrb-1002","title":"Tele Vue Dovetail for QRB-1002","description":"\u003cp\u003eThis dovetail is designed to slide right into the Tele Vue QRB-1002 or a similar Vixen finder shoe.  The dovetail will attach to a Tele Vue Sol Searcher or the Tele Vue Universal Finder mount make them a great quick change accessory. \u003c\/p\u003e\n\u003c!----\u003e","brand":"TeleVue","offers":[{"title":"Default Title","offer_id":41600113508425,"sku":"QRD-1006","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0573\/7974\/9961\/files\/qrd_1006_dovetail_qrb.jpg?v=1720722538"}],"url":"https:\/\/astronomics.com\/collections\/finderscope-brackets.oembed?page=2","provider":"Astronomics","version":"1.0","type":"link"}