Counterweights & Shafts

This extra iOptron 11 pound counterweight helps you balance heavy loads mounted on an iOptron iEQ45 or CEM60 go-to equatorial mount.This iOptron #8...

This iOptron #8027-05 2.2 kg (5.5 pound) counterweight lets you balance an extra-heavy optical tube and heavy accessory load (such as a photoguide ...

Works with various iOptron Mounts Fits 21mm Diameter Shaft Weighs 3 pounds/1.35kg The iOptron 3 pound (also know as 1.35kg) weight is designed to...

This iOptron 4.5 kg (9.8 pound) counterweight lets you balance a heavy optical tube and heavy accessory load (such as a photoguide scope, accessory...

This iOptron 2 kg (4.5 pound) counterweight lets you balance a heavy optical tube and heavy accessory load (such as a photoguide scope, accessory d...

This counterweight will fit the following mounts: CEM70/CEM70G GEM45/GEM45G/GEM45EC* iEQ45/iEQ45 Pro CEM60/CEM60EC CEM40, CEM40G, CEM40EC* * Plea...

This iOptron counterweight shaft extension lets you create more counterbalance weight to balance heavier payloads on all versions of the iOptron iE...

  Works with the EQ2 Fits 13mm Diameter Shaft Weighs 4.5 pounds/2kg The iOptron 4.5 pound (also know as 2kg) weight is designed to fit on the iOp...

The iOptron 7326 22 pound (10kg) counterweight is the perfect addition to your CEM120 if you need some extra weight for your rig.  The bore size of...

Works with the SmartEQ and SmartEQ Pro Fits 16mm Diameter Shaft Weighs 2.2 pounds/1kg The iOptron 2.2 pound (also know as 1kg) weight is designed...

Designed for SmartStar Cube and Cube Pro Mount from iOptron 5.9" long Stainless Steel construction weighing 11oz Everynow and again you have a li...

Counterweight balance kit for an HAZ46 mount. It only works when the mount is set at bino mode, i.e., the dovetail saddle is on top of the mount.

This is the extension bar for a CEM26/HEM27/GEM28 mount. It attaches to the original bar and will create more counterbalance torque.Dimensions: Di...

Special designed counterweight kit for Z-axis balance.It fits on following iOptron mounts (has a M8 threaded holes on dovetail saddle): CEM120 CEM...

Counterweight shaft with safety screw for following mounts: Strain Wave AZ/EQ mount HAE series SkyGuider Pro SkyHunter SkyTracked Pro (CW package)...

If you are needing a counterweight for your iOptron SkyTracker or SkyTracker Pro you search can end here.  When you are working with long camera le...

Need a larger payload capacity on your HEM27 or HEM44 mount?  The iOptron HEM series of mounts were designed hold reasonable amount of weight witho...