Large astronomical binoculars offer a wonderful way to explore the night sky. Using both eyes gives star fields a natural, immersive quality, while the wide views available through many binocular telescopes make open clusters, nebulae, and the Milky Way particularly enjoyable. The difficulty is supporting them. Once binoculars become large enough to require interchangeable eyepieces and substantial optical tubes, holding them steady and moving them comfortably across the sky becomes a job for a serious mount.
The iOptron AZ Mount Pro Heavy-Duty Binocular Adapter #8956 allows owners of the AZ Mount Pro to use their computerized mount with appropriately sized astronomical binoculars. It replaces the mount's standard telescope saddle with a specially designed adapter bar, binocular dovetail saddle, and stainless steel counterweight shaft. The binoculars are supported beside the mount head, allowing them to move with the AZ Mount Pro's computerized GoTo and tracking system.
For observers who already own an AZ Mount Pro, this adapter offers a way to enjoy the convenience of finding and tracking celestial objects through a large binocular telescope without purchasing an entirely separate motorized mounting system. It's especially appealing for angled-eyepiece binoculars, which allow more comfortable observing as objects climb higher in the sky.
Designed Specifically for the AZ Mount Pro
The #8956 isn't a simple bracket that clamps into the mount's existing dovetail saddle. It is a dedicated conversion that replaces the standard saddle arrangement with a heavy-duty side-mounted support. The adapter includes a long mounting bar, binocular dovetail saddle, matching dovetail plate, and a 20mm stainless steel counterweight shaft. Three shaft mounting positions allow the balance arrangement to be adjusted for different binocular configurations.
The binoculars mount on the side of the AZ Mount Pro where the power switch is located. That orientation is important: iOptron's installation instructions specifically warn that installing the binocular saddle on the opposite side can cause interference with the mount body during slewing. Proper installation and clearance checks are essential before using the GoTo system.
Once assembled and carefully balanced, the adapter allows the AZ Mount Pro to carry the binoculars through its normal altitude and azimuth movements. The mount's GPS-assisted Level and Go system, Go2Nova hand controller, and automatic tracking remain available, giving you computerized control of your binocular observing sessions.
Counterweight and Balance Requirements
Large binocular telescopes place different demands on a mount than a conventional optical tube. Their weight distribution, mounting foot, and position relative to the altitude axis all influence how well the equipment balances. That's why the #8956 includes a dedicated 20mm stainless steel counterweight shaft with three mounting positions on the adapter bar.
Counterweights are not included with the adapter. Compatible iOptron counterweights are available separately, and the correct amount depends on the weight and geometry of your binoculars. The AZ Mount Pro's existing counterweight may be suitable for some arrangements, but heavier binoculars can require additional weight. Follow the manufacturer's balancing procedure rather than assuming a particular counterweight will work with every instrument.
Cloudy Nights discussions about large binocular telescopes on the AZ Mount Pro reinforce the importance of balancing both the telescope assembly and the opposing counterweights. Some observers have successfully used substantial binocular telescopes with the mount, while others have encountered difficulties with different brackets and mounting arrangements. These experiences are a useful reminder that overall weight is only part of the equation. Proper balance, secure attachment, and adequate support beneath the mount are equally important.
Installation and Setup
Installing the adapter requires removing the AZ Mount Pro's original dovetail saddle and changing the orientation of the underlying saddle adapter. iOptron provides illustrated instructions for the conversion, and a set of metric Allen wrenches is required. The procedure is manageable for someone comfortable working with telescope hardware, but the manufacturer specifies several steps that should be followed carefully.
-
Secure the mount. Tighten the altitude lock, remove the hand-controller hanger, and place the mount in its zero position with the original saddle's reference arrow pointing upward.
-
Remove the original saddle. Release its four mounting screws, then remove and rotate the underlying saddle adapter 90 degrees as shown in iOptron's instructions. The adapter itself must be repositioned; simply rotating the altitude axis is not the same procedure.
-
Install the binocular adapter. Attach the binocular dovetail saddle to the long adapter bar, then secure the assembly to the AZ Mount Pro with the binocular saddle on the power-switch side.
-
Install the counterweight shaft. Thread the supplied 20mm shaft into the appropriate mounting hole. iOptron indicates that the lowest of the three positions is normally used.
-
Add the counterweight before the binoculars. Secure a suitable counterweight on the shaft, then attach the binoculars to the supplied dovetail plate or a compatible adapter.
-
Mount the binoculars securely. Slide the plate into the saddle with the safety stopper at the top when the mount is in its zero position. Check every attachment and carefully establish proper balance before releasing the altitude lock or operating the mount.
These steps are a general overview, not a substitute for the manufacturer's illustrated assembly instructions. Always support the binoculars and counterweights during adjustments, and verify clearance throughout the mount's travel before commanding a GoTo slew.
Under the Night Sky
One of the great pleasures of large astronomical binoculars is exploring fields that are simply too wide to appreciate through a high-magnification telescope. The Double Cluster in Perseus is a favorite, with two rich groups of stars sharing the same field in appropriately sized binoculars. The Pleiades are another natural target, their bright blue-white stars scattered across a broad section of sky. With interchangeable-eyepiece binocular telescopes, changing magnification allows you to explore individual regions more closely while retaining the comfort of two-eyed observing.
Under dark skies, the Andromeda Galaxy stretches across a surprisingly large area. Depending on the binoculars, eyepieces, sky conditions, and field of view, you may also detect its companions M32 and M110. During summer, the Sagittarius star clouds, Lagoon Nebula, and surrounding Milky Way fields provide hours of rewarding exploration. The AZ Mount Pro's GoTo system can help locate individual targets, while automatic tracking keeps them in view as you observe.
That tracking capability is particularly welcome when sharing binocular views with another observer. Rather than continually adjusting a manual mount, you can concentrate on examining the field or allowing someone else to enjoy it. For large binocular telescopes that become tiring to aim and support manually, computerized tracking can make longer observing sessions much more comfortable.
Observing Tip: Counterweight First, Binoculars Second
iOptron's installation instructions specify attaching the counterweight before installing the binoculars. Follow that order every time you assemble the system, and support the equipment whenever the altitude lock is loosened. Make balance adjustments carefully, with all locking hardware secure before allowing the mount to move freely. When removing the equipment, support and remove the binoculars before taking off the counterweight. A large binocular telescope represents a substantial investment, and a few extra minutes spent checking balance and attachment are well worthwhile.
Know Before You Buy
-
AZ Mount Pro compatibility only. The #8956 is specifically designed for the iOptron AZ Mount Pro. Compatibility with other iOptron mounts is not established.
-
Counterweights are not included. The adapter includes a 20mm counterweight shaft, but suitable counterweights must be supplied separately.
-
Binocular mounting compatibility must be checked. Your binocular telescope must attach securely to the supplied dovetail plate, either directly or through a suitable additional adapter.
-
Installation requires removing the original saddle. Metric Allen wrenches are needed, and iOptron's assembly instructions must be followed.
-
Correct orientation is essential. The binocular saddle must be installed on the power-switch side to avoid interference with the mount head.
-
Check the total equipment weight. iOptron does not publish a separate payload rating for this adapter. The AZ Mount Pro's general 33 lb primary payload rating should not be interpreted as a guaranteed binocular capacity for every offset mounting arrangement.
-
Balance is especially important. Heavy binoculars, eyepieces, mounting brackets, and counterweights all affect the complete system.
-
A stable tripod or pier is recommended. Consider the weight of the complete mounted assembly, particularly when using larger binocular telescopes.
-
Angled eyepieces are more comfortable overhead. Binocular telescopes with 45-degree or 90-degree eyepieces generally provide easier access to objects high in the sky than straight-through designs.
-
Mount and binoculars sold separately. This listing is for the binocular adapter assembly only.
What's Included
- iOptron heavy-duty binocular adapter bar
- Binocular dovetail saddle
- Binocular dovetail mounting plate with safety stopper
- 20mm diameter stainless steel counterweight shaft
- Required adapter mounting screws and hardware
Counterweights, binocular telescope, AZ Mount Pro mount, and metric Allen wrenches are not included. Additional binocular-specific mounting hardware may be necessary.
FAQ
- Which telescope mount does the #8956 adapter fit?
- It is designed specifically for the iOptron AZ Mount Pro. It replaces the mount's normal dovetail saddle arrangement with a side-mounted binocular support. Do not assume compatibility with other iOptron mounts.
- Are counterweights included?
- No. The adapter includes a 20mm stainless steel counterweight shaft, but counterweights are sold separately. The amount needed depends on the weight and balance of your binocular telescope.
- Will this adapter work with my binocular telescope?
- That depends on the binoculars' mounting arrangement, total weight, and balance requirements. The instrument must attach securely to the included dovetail plate or a suitable additional adapter. For larger binocular telescopes, contact Astronomics before ordering if you're uncertain about compatibility.
- Does the adapter have its own weight capacity?
- iOptron does not publish a separate binocular payload rating for the #8956. The AZ Mount Pro has a general primary payload rating of 33 pounds, but the side-mounted binocular arrangement introduces different balance and leverage considerations. Compatibility should be evaluated for the specific binocular telescope rather than relying only on its weight.
- Can I use GoTo and tracking with my binoculars?
- Yes. Once the adapter is correctly installed, the binoculars move with the AZ Mount Pro's computerized altitude and azimuth axes. The mount's GoTo and tracking features remain available, provided the system is properly balanced and aligned.
- Can I convert my AZ Mount Pro back to normal telescope use?
- Yes. The binocular adapter can be removed and the original telescope saddle reinstalled, following the appropriate assembly instructions. Keep the original mounting hardware in a safe place for future use.
- Do I need tools to install the adapter?
- Yes. The installation requires metric Allen wrenches to remove the original saddle, reposition the underlying adapter, and secure the new assembly. The wrenches are not included.
- Does it work with straight-through binoculars?
- Potentially, if the binoculars can be mounted securely and balanced properly. However, straight-through designs can be uncomfortable for observing objects high above the horizon. Angled-eyepiece binocular telescopes are generally easier to use in those positions.
Accessories
iOptron Compatible Counterweights (sold separately): Counterweights with the correct bore are required to balance the binocular adapter assembly. Available weights include approximately 3 lb, 4.4 lb, and 10 lb options. Select the combination needed for your binocular telescope.
iOptron AZ Mount Pro (sold separately): The computerized alt-azimuth mount required for this adapter. The AZ Mount Pro is available with LiteRoc tripod and Tri-Pier support configurations.
Additional Binocular Mounting Hardware (if required): Some binocular telescopes may need a manufacturer-specific mounting plate or adapter to attach securely to the included dovetail plate.
See our binocular accessories for additional mounting and observing equipment.
Final Thoughts
The iOptron AZ Mount Pro Heavy-Duty Binocular Adapter offers a practical way to combine the wide-field enjoyment of large astronomical binoculars with the convenience of computerized GoTo and tracking. Instead of continually repositioning a heavy binocular telescope by hand, you can use the AZ Mount Pro to locate and follow your favorite objects while observing comfortably through both eyes.
This is a specialized accessory, and careful installation and balancing are essential. Counterweights must be selected separately, binocular mounting compatibility needs to be checked, and the manufacturer's assembly instructions should be followed closely. For an AZ Mount Pro owner with a suitable binocular telescope, however, the #8956 can open up an enjoyable new way to explore the night sky.